+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio , NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: OriginaL/Clone PCMFLASH Questions/Answers (/showthread.php?tid=62038)
RE: OriginaL/Clone PCMFLASH Questions/Answers - pardul - 11-05-2022
hi
i have ori pcm flash
but cant buy orginal scanmatik
can i use orginal pcm flash with clone scanmatik ?
RE: OriginaL/Clone PCMFLASH Questions/Answers - Frontera_i - 12-05-2022
tested PCMflash original +scanmatic 2 pro+module71
bench read write checksum all ok
module 71
MED17.5.26 1,2 TSi Seat, VW
(11-05-2022, 18:58 PM)pardul Wrote: hi
i have ori pcm flash
but cant buy orginal scanmatik
can i use orginal pcm flash with clone scanmatik ?
YES
RE: OriginaL/Clone PCMFLASH Questions/Answers - ROD BENDERS - 12-05-2022
(11-05-2022, 18:58 PM)pardul Wrote: hi
i have ori pcm flash
but cant buy orginal scanmatik
can i use orginal pcm flash with clone scanmatik ?
The answer is yes you can, but get scanmatik as soon as possibel
Br
Rb
RE: OriginaL/Clone PCMFLASH Questions/Answers - pardul - 13-05-2022
I kran that clone
Someone using that config ?
RE: OriginaL/Clone PCMFLASH Questions/Answers - raffy haddad - 15-05-2022
Bench read module 71 with ori sm2
Mini cooper mev17.2 to extract isn
bmw bike bmsx ecu bench read
for immo purpose .
Didn't test write due to no need
RE: OriginaL/Clone PCMFLASH Questions/Answers - aaronpaul - 29-05-2022
Always original Scanmatik 2 is good
RE: OriginaL/Clone PCMFLASH Questions/Answers - Diagmaister - 20-06-2022
I have pcmtuner and its working very good.
But im only using module 71.
So have not chance to test obd yet.
RE: OriginaL/Clone PCMFLASH Questions/Answers - foxportal - 07-07-2022
PCMFlash 1.2.5 ori
Scanmatik ori
module 77
BMW E53
0281011414
B05cн EDC16C1-4.32
Clone -> ok
RE: OriginaL/Clone PCMFLASH Questions/Answers - victorysatgr - 13-07-2022
hello from me too...
I have been using pcmflash ori & sm2 pro ori for a long time, I can say that I have never been disappointed....
(except once with an ecu from a ford sid208, I wrote the ecu with module 53, and when I put it at car, one time it worked, one time it didn't... the processor crashed.... I made a clone with the same tool and everything Okay....
probably the problem was in the power supply, I used 12 volts while I should have put at least 13+.... or it just happened... what can I say...)
RE: OriginaL/Clone PCMFLASH Questions/Answers - RSMtune_remap - 26-07-2022
Please can anyone told me, if it is possible to “update” software on edc17cp14 audi a6 c6 - 03L906019AE from version 5421 to 6410 ? Pcmflash doesn’t have 5421 version. In general, is it possible to update via VR file with pcmflash ? I have pcmflash genuine tool. Thanks