+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: I need a tuned file Renault Kangoo 1,5 Dci (/showthread.php?tid=4979)
I need a tuned file Renault Kangoo 1,5 Dci - anjomag - 25-06-2014
Hello,
who can do a good remap for my car renault kangoo 1,5 Dci ?
here is ori file
RE: I need a tuned file Renault Kangoo 1,5 Dci - naphosim - 26-06-2014
Map is incomplete read must have 256kb
RE: I need a tuned file Renault Kangoo 1,5 Dci - anjomag - 26-06-2014
(26-06-2014, 08:35 AM)naphosim Wrote: Map is incomplete read must have 256kb
i read this file with galletto and i did limits off with volta software and write file again in ecu with galletto and car did not have limits now
are you certainty that file is incomplete??
RE: I need a tuned file Renault Kangoo 1,5 Dci - pinotec - 27-06-2014
(26-06-2014, 08:35 AM)naphosim Wrote: Map is incomplete read must have 256kb
delphi DCM1.2 file is 128kb read partial and 480kb full read
delphi DDCR file is 40kb read partial and 256kb full read
RE: I need a tuned file Renault Kangoo 1,5 Dci - anjomag - 27-06-2014
(27-06-2014, 20:13 PM)pinotec Wrote:(26-06-2014, 08:35 AM)naphosim Wrote: Map is incomplete read must have 256kb
delphi DCM1.2 file is 128kb read partial and 480kb full read
delphi DDCR file is 40kb read partial and 256kb full read
how can you do full read?
i just can read selecting Delphy E4*Can
i attached images about read and file
regards
RE: I need a tuned file Renault Kangoo 1,5 Dci - pinotec - 28-06-2014
Quote:how can you do full read?
with fgtech ,bootmode
see DOCUMENTS\BOOT_MODE_ST10_C167\Renault_clio_ST10F280.jpg
Quote:i just can read selecting Delphy E4*Canfile is ok, fgtech with obd read partial file (128kb)
for work tuning this file is ok
RE: I need a tuned file Renault Kangoo 1,5 Dci - anjomag - 28-06-2014
(28-06-2014, 21:46 PM)pinotec Wrote:Quote:how can you do full read?
with fgtech ,bootmode
see DOCUMENTS\BOOT_MODE_ST10_C167\Renault_clio_ST10F280.jpg
Quote:i just can read selecting Delphy E4*Canfile is ok, fgtech with obd read partial file (128kb)
for work tuning this file is ok
ok now i see, thank you.
and for write is necessary do in boot mode? or can be by obd?
RE: I need a tuned file Renault Kangoo 1,5 Dci - pinotec - 28-06-2014
If use file 128kb write obd