+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio , NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: VDOeditor (/showthread.php?tid=50614)
Pages:
1
2
VDOeditor - volavka - 08-05-2019
okay guys
is the time to share with you this nice program VDOeditor v. 1.0.3.6
The VDOeditor program is a visual editor of the EEPROM dumps of VDO dashboards based on the NEC850 / Renesas microprocessor, widely used in a number of VAG vehicles: VW, Seat, Skoda.
The program does NOT interact with the immo area, so it does not allow you to adjust the mileage and adjust the keys of the immobilizer.
![[Image: VdkyhtC.jpg]](https://i.imgur.com/VdkyhtC.jpg)
Currently, the program allows you to configure the following parameters in a simple and visual form (the EEPROM type is shown in brackets):
- enable / disable test arrows when the ignition is turned on (24c64, 24c32);
- enable / disable test arrows when the ignition is turned on (24c64, 24c32);
- adjust the arrow test phases (24c64);
- adjust the arrow test phases (24c64);
- enable / disable the DRL indicator (24c64);
- enable / disable the DRL indicator (24c64);
- turn on / off the backlight arrows in DRL mode (24c64, 24c32). Brightness is regulated by a light sensor built into the dashboard;
- turn on / off the backlight arrows in DRL mode (24c64, 24c32). Brightness is regulated by a light sensor built into the dashboard;
- enable / disable the backlight of the scales in the DRL mode (24c64, 24c32). Brightness is regulated by a light sensor built into the dashboard;
- enable / disable the backlight of the scales in the DRL mode (24c64, 24c32). Brightness is regulated by a light sensor built into the dashboard;
- enable / disable light sensor (24c64);
- enable / disable light sensor (24c64);
- adjust the sensitivity of the ambient light sensor and the minimum backlight level (24c64);
- adjust the sensitivity of the ambient light sensor and the minimum backlight level (24c64);
- enable / disable the "Place in the tank" menu (24c64);
- enable / disable the "Place in the tank" menu (24c64);
- enable / disable the “Oil temperature” menu (24c64, 24c32). Depends on the SW version of the dashboard;
- enable / disable the “Oil temperature” menu (24c64, 24c32). Depends on the SW version of the dashboard;
- enable / disable the “Side Assist” menu and the “Side Assist” indicator (24c64). Depends on the SW version of the dashboard. May require revision of the PCB;
- enable / disable the “Side Assist” menu and the “Side Assist” indicator (24c64). Depends on the SW version of the dashboard. May require revision of the PCB;
- enable / disable the “Support” menu (for example, to display a support phone) (24c64);
- enable / disable the “Support” menu (for example, to display a support phone) (24c64);
- change the number of fuel level sensors (24c64);
- change the number of fuel level sensors (24c64);
- change the look of the parking brake indicator (24c64). Depends on the SW / HW dashboard version;
- change the look of the parking brake indicator (24c64). Depends on the SW / HW dashboard version;
- change parking brake type (24c64). Revision of the PCB is required ;
- change parking brake type (24c64). Revision of the PCB is required ;
- temporarily change the MFW type (24c64);
- temporarily change the MFW type (24c64);
- change the appearance of the welcome screen (24c64, 24c32);
- change the appearance of the welcome screen (24c64, 24c32);
- change car model view (24c64, 24c32);
- change car model view (24c64, 24c32);
- correct the operation of dial gauges after updating SW (there are restrictions on the use of PN, SW, HW);
- correct the operation of dial gauges after updating SW (there are restrictions on the use of PN, SW, HW);
- export and import fuel level curves;
- export and import fuel level curves;
- arbitrarily adjust the fuel level curves;
- arbitrarily adjust the fuel level curves;
- import speedometer data and thus replace the scale (miles / km, 240/280/300) ;
- import speedometer data and thus replace the scale (miles / km, 240/280/300) ;
- import tachometer data and thus replace the scale (diesel / gasoline, 6000/8000) ;
- convert speedometer data from km / h to m / h and vice versa;
- change a number of other settings.
- import tachometer data and thus replace the scale (diesel / gasoline, 6000/8000) ;
![[Image: z29itls.jpg]](https://i.imgur.com/z29itls.jpg)
![[Image: 4l7fqII.jpg]](https://i.imgur.com/4l7fqII.jpg)
![[Image: Ii5GOY6.jpg]](https://i.imgur.com/Ii5GOY6.jpg)
The program interface is available in the following languages:
English
Spanish
German
Polish
Russian.
![[Image: Y0yTpcJ.jpg]](https://i.imgur.com/Y0yTpcJ.jpg)
The program has a built-in "white" list of dashboards, work with which has been confirmed.
in attachment you can find a complete list of supported panels.
| VDOEditor WhiteList.txt | ||
| File Type: |
|
 |
| Downloaded: | 1,000 times | |
| Size: | 2.22 KB | |