Solved ✔ NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 (/showthread.php?tid=52645) |
NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - sqorpius - 22-06-2019 Hi all, I've installed Launcher PRO 3.4.1 and it is a whole lot quicker with reading/modifying FEM/BDC/NBT/NBT2 CAFD. I do have one problem tho. With NBT EVO (G01, 19-03 i-level) It seems to not map properly. (tested with 3.27, 3.28, 3.31, 3.32) Does anybody know how to fix this? (see picture for reference) They are not dots (so not memory issue i presume), but: HMI_0_0_1 HMI_0_0_2 etc. CAFD = CAFD_00001EF6_006_039_204.NCD and attached in this post, can anybody properly read the NCD? Thanks in advance! RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - BMWdriva - 22-06-2019 RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - sqorpius - 22-06-2019 (22-06-2019, 13:09 PM)BMWdriva Wrote: Thanks! What could be the reason why your Launcher PRO 2.8 does map it with ease, and my version does not? Any settings that need to be changed? RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - Siki78 - 22-06-2019 Try with new psdzdata 4.17.xx RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - chang2 - 22-06-2019 Hello, works with 3.4.1.208: RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - sqorpius - 22-06-2019 That's really weird. I am on the latest PsdZ, can open all other CAFD perfectly fine, even older NBT EVO CAFD. I tried with every E-SYS, and same result every time. Anybody knows in which direction to look for here? RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - sqorpius - 22-06-2019 Think I found the problem, but not sure how to solve it. On my desktop (3.33.4) I tried it as well and it opens perfectly, just as CHANG2 and BMWDriva reported. Desktop (3.33.4) mapping used = @Skatermenot BASE: 18-04 iStep Notebook (3.33.4) mapping used = @Skatermenot BASE: 17-11 iStep For some reason, even with newest E-SYS / Launcher PRO / PsdZ my notebook falls back on 17-11 mapping, even tho newest launcher is installed. I've deleted everything and reinstalled it all, without succes. Does anybody know how to make sure newest mapping is applied? RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - BMWDriver999 - 22-06-2019 Tokenmaster recommended to Install NET.framework 4.8. https://cartechnology.co.uk/showthread.php?tid=51557&page=5 RE: NBT EVO CAFD reading w. Launcher PRO 3.4.1 Build 208 - sqorpius - 22-06-2019 I did install NET framework 4.8, still same issue. in CAFD header it still shows @Skatermenot BASE 17-11 instead of 18-4 mapping. Reinstalling does not help.. UPDATE: Problem solved, thanks to Eli's tip to delete %Temp%\Cache files. It is now mapping properly again. |