Solved ✔ E SYS cic programing help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ E SYS cic programing help (/showthread.php?tid=58165) |
E SYS cic programing help - kimetp - 18-10-2019 hello i want to reflash cic but i dont see in list in esys i get tal but not work RE: E SYS cic programing help - jaramillo - 18-10-2019 If you want to reflash you should modify/manipulate the initial SVT Just in that way you can proceed. RE: E SYS cic programing help - Jumper - 18-10-2019 This must be calculate with a TALFILTER RE: E SYS cic programing help - 88tuning.id - 22-10-2019 there's a guide to ecu flashing in this forum, and you can always follow that guide. but to put it simply: in comfort mode, read FA and then save it. read SVT and then save it as SVT_IST entering the istep shipment and target, calculate, then save it as SVT_SOLL then calculate TAL based on those mentioned two SVT. and choose execute. then you'll continue to TAL-Processing. just like your attachment RE: E SYS cic programing help - xxiFear - 22-10-2019 (22-10-2019, 10:03 AM)88tuning.id Wrote: there's a guide to ecu flashing in this forum, and you can always follow that guide. but to put it simply: He didn't ask for a guide to flash his CIC in general. He already successfully calculated TAL. I think his CIC just does not get any newer SWFL so it is not included in the TAL. As already said: manipulate TAL and just include the SWFLs which are already on the CIC... RE: E SYS cic programing help - kimetp - 22-10-2019 I fix problem i get older e sys and i flash it with 3.27 esys Thanx you all |