+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr (/showthread.php?tid=62068)
Pages:
1
2
Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - sazimam - 17-03-2022
Here you are version 75. No passwords, works well for me with VI2. Tested also on EU cars crippled by Renault - also OK.
Including Reprog database for ECU and TCM.
Also works with Tactrix passthru but only as DTC Reader/ Eraser toy.
Enjoy
EDIT > link updated
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - eliasole - 17-03-2022
Will work on win 10?
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - sazimam - 20-03-2022
(17-03-2022, 14:38 PM)eliasole Wrote: Will work on win 10?
Yess, I've got it running on Win10 actually.
Native installation, easy setup.
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - udin bn salih - 10-04-2022
how to use openport tactric pasthru j2534 for this software?
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - ntuner - 18-07-2022
What’s a cheap interface I can use ?
Does this version require a Nissan login to use the ADAS radar calibration?
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - gizmo220 - 23-07-2022
(10-04-2022, 00:11 AM)udin bn salih Wrote: how to use openport tactric pasthru j2534 for this software?
[current_geographical_zones]
market=3
area=6
country=POL
[current_language]
language=PL
[unit_conversion]
unit_conv_1=G001.S001
unit_conv_2=G002.S003
unit_conv_3=G003.S005
unit_conv_4=G004.S007
[current_channel]
channel=0
[system_management]
access_mode=1
[device]
vi_device_name=OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
[vehicales]
tab_index=3
[vehicles]
tab_index=3
[mode]
debug_mode=TRUE
debug_mode_vehicle_batery=TRUE
[vehicals]
tab_index=4
Change the language and search for vci should find.
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - PM072 - 28-07-2022
Installation of CONSULT IIIv75 is complete.
VI connection completed.
If you select programming and there is no data at the end, you will get an error.
Where to get the programming files.
Location of programming data.
Please tell me.
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - davebm - 29-07-2022
(28-07-2022, 01:42 AM) PM072 Wrote: Installation of CONSULT IIIv75 is complete.
VI connection completed.
If you select programming and there is no data at the end, you will get an error.
Where to get the programming files.
Location of programming data.
Please tell me.
I have the same question
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - Fox-1VietNam - 29-07-2022
(18-07-2022, 03:56 AM)ntuner Wrote: What’s a cheap interface I can use ?
Does this version require a Nissan login to use the ADAS radar calibration?
u need make ver 2022 or 2021 and login account for adas learn
(29-07-2022, 17:39 PM)davebm Wrote:(28-07-2022, 01:42 AM) PM072 Wrote: Installation of CONSULT IIIv75 is complete.
VI connection completed.
If you select programming and there is no data at the end, you will get an error.
Where to get the programming files.
Location of programming data.
Please tell me.
I have the same question
go to c reprogram folder
RE: Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr - ciren - 31-07-2022
would a mini vci cable work for DTC read and work support?