+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW EVO ATM retrofit problem (/showthread.php?tid=63220)
Pages:
1
2
BMW EVO ATM retrofit problem - Pedrom92 - 12-04-2022
Hello, I have a BMW f11 that has NBT Evo installed and already activated, I wanted to retrofit the ATM, I bought the cable and flashed the ATM to change the VIN, but I cannot inject the CAFD, I already tried as f25 as f06 F12 and no it works. does not accept with the F11's VIN, flashing there was no problem but injecting the CAFD no, if I use my f31's FA it injects without problems but just change the VIN that no longer works.
Anyone have FA to try?
This ATM is ECE 3G.
Thanks
RE: BMW EVO ATM retrofit problem - maxwell4321 - 13-04-2022
Try change the date in F11 FA to whatever date you have in the F31 FA
Also check that in Type that Typschlussel matches the F11
RE: BMW EVO ATM retrofit problem - Siki78 - 13-04-2022
Calculate tal to see which cafd should to be there. Go to coding tab read ecu save it then write manually cafd in svt and vo code ATM
RE: BMW EVO ATM retrofit problem - Krysiaman - 13-04-2022
Shouldn't you use original VIN from ATM to keep it working?
RE: BMW EVO ATM retrofit problem - Pedrom92 - 13-04-2022
Flash again with f25 and now working. But on idrive dont have any option in connectedrive. All FSC accept, have 6AK 6AE 6AC 6NS 6AM 6AN 6AP 6AR.
RE: BMW EVO ATM retrofit problem - alexnaoumov - 13-04-2022
(13-04-2022, 08:34 AM)Pedrom92 Wrote: Flash again with f25 and now working. But on idrive dont have any option in connectedrive. All FSC accept, have 6AK 6AE 6AC 6NS 6AM 6AN 6AP 6AR.
did you swap the sim from your tcb in to the atm? sim is locked to vin
RE: BMW EVO ATM retrofit problem - Pedrom92 - 13-04-2022
Yes. Code FDL to 3G and work all.
Thanks
RE: BMW EVO ATM retrofit problem - nightrainbow - 27-02-2024
Hello,
Can someone please instruct me on how to change the vin num on an atm module? Either with E-sys or Tool32?
Have a few modules to do some testing, but cant find a way to write a vin num, other than maybe program the unit.
Any help appreciatre it/
RE: BMW EVO ATM retrofit problem - user_530d - 27-02-2024
Inside coding file you will find LONGVIN but ATM function is donor VIN related.
RE: BMW EVO ATM retrofit problem - nightrainbow - 27-02-2024
(27-02-2024, 16:01 PM)user_530d Wrote: Inside coding file you will find LONGVIN but ATM function is donor VIN related.
Is that on the ncd file?
When I open it I dont see a LONGVIN entry.
Either on e-sys or opening the file with a text editor