Ford Mondeo MK3 used PCM renew - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Ford Mondeo MK3 used PCM renew (/showthread.php?tid=65492) |
Ford Mondeo MK3 used PCM renew - alexturbo - 03-06-2022 Hello, how to replace used PCM on Ford Mondeo MK3? Vxdiag with IDS or Forscan? instructions please. thanks best regards RE: Ford Mondeo MK3 used PCM renew - rwgodoy - 04-06-2022 Hello, First off all, do the PMI Procedure. Second, PATS. (make sure you have 2 keys to program) If needed, you can Flash the new ECU. except the Flash procedure, you can use ForScan to Flash, you can use IDS (VxDiag works fine) RE: Ford Mondeo MK3 used PCM renew - alexturbo - 04-06-2022 (04-06-2022, 02:33 AM)rwgodoy Wrote: Hello,Hi, PMI procedure not performed due to FEPS error. I did not measure 18V on pin 13 during this procedure. What exactly does this PMI do? Can't I do PATS directly? |