CarTechnoloGY
Solved ✔ Golf 6 1.4 CAXA MED17.5.5 clone - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Golf 6 1.4 CAXA MED17.5.5 clone (/showthread.php?tid=70688)

Pages: 1 2

Golf 6 1.4 CAXA MED17.5.5 clone - emiliof56 - 24-10-2022

Hello,

i would need some help for cloning a Golf 6 1.4 CAXA engine MED17.5.5 ecu.
Ecu part number is VAG 03C 906 016 BM or BOSCH 0 261 S06 488.

Here the two files, bench read, old ecu (damaged by water but full read was successful) and new ecu (used).


Golf 1.4 CAXA.zip
File Type: .zip
Downloaded: 12 times
Size: 1.47 MB



Could someone please help me preparing the files for cloning the old ecu into the new one?
I know some kind of preparation is needed because of OTP areas.

Thank you

RE: Golf 6 1.4 CAXA MED17.5.5 clone - AZCKNCLLC - 25-10-2022

(24-10-2022, 22:07 PM)emiliof56 Wrote:  Hello,

i would need some help for cloning a Golf 6 1.4 CAXA engine MED17.5.5 ecu.
Ecu part number is VAG 03C 906 016 BM or BOSCH 0 261 S06 488.

Here the two files, bench read, old ecu (damaged by water but full read was successful) and new ecu (used).




Could someone please help me preparing the files for cloning the old ecu into the new one?
I know some kind of preparation is needed because of OTP areas.

Thank you

need mpc and eeprom from both ecu's.

RE: Golf 6 1.4 CAXA MED17.5.5 clone - emiliof56 - 25-10-2022

I attached a full read from both ecus, both file are in the compressed zip attached.

RE: Golf 6 1.4 CAXA MED17.5.5 clone - raffy haddad - 25-10-2022

I think he mean save files seperatly

RE: Golf 6 1.4 CAXA MED17.5.5 clone - hurricane - 25-10-2022

(24-10-2022, 22:07 PM)emiliof56 Wrote:  Hello,

i would need some help for cloning a Golf 6 1.4 CAXA engine MED17.5.5 ecu.
Ecu part number is VAG 03C 906 016 BM or BOSCH 0 261 S06 488.

Here the two files, bench read, old ecu (damaged by water but full read was successful) and new ecu (used).




Could someone please help me preparing the files for cloning the old ecu into the new one?
I know some kind of preparation is needed because of OTP areas.

Thank you

write the backup file from ori ecu to donor ecu and start your car

RE: Golf 6 1.4 CAXA MED17.5.5 clone - emiliof56 - 25-10-2022

Here the two files, each one in a separate file.

New (donor - receiver) ecu.rar
File Type: .rar
Downloaded: 8 times
Size: 694 KB


Old ecu defective.rar
File Type: .rar
Downloaded: 8 times
Size: 694.92 KB



RE: Golf 6 1.4 CAXA MED17.5.5 clone - Stig33 - 25-10-2022

(25-10-2022, 13:25 PM)emiliof56 Wrote:  Here the two files, each one in a separate file.

Bro to cloning need as separate

OLD ECU (MPC.BIN and EEPROM.BIN)
NEW ECU (MPC.BIN and EEPROM.BIN)

Need 4 files...

RE: Golf 6 1.4 CAXA MED17.5.5 clone - raffy haddad - 25-10-2022

What tool your using to read ?
When read it ask to save files seperatly eeprom and mpc
and do same for 2nd ecu
regards

RE: Golf 6 1.4 CAXA MED17.5.5 clone - emiliof56 - 25-10-2022

BFlash has been used to read the files, and there is no option to separate MPC and EEPROM in two files.

RE: Golf 6 1.4 CAXA MED17.5.5 clone - Stig33 - 25-10-2022

(25-10-2022, 19:41 PM)emiliof56 Wrote:  BFlash has been used to read the files, and there is no option to separate MPC and EEPROM in two files.

Ok.

Try this this file upload to new ecu....


SEND REPORT PLEASE !

no pass