+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Solved ✔ Berlingo B9 Cruise Activation by Dump (/showthread.php?tid=70952)
Berlingo B9 Cruise Activation by Dump - willy16 - 01-11-2022
Hi All!
My costumer bring me a Berlingo B9 1.6HDi From 2010 with EDC16C34 for installing CC.
I installed the cruise control switch, activated in BSI then tried in ECU too without succes....
Tried with Diagbox 7.66 and 9.129, every time give error message "Configuration failure". Like as P. Partner same result.
Than I tried switch on in flash dump without succes.
Somebody know what the hell could this be and activate somehow?!
Best Regards.
With Launch X431 Pro3 succesfully coded to Present RVV (CC).
RE: Solved! Berlingo B9 Cruise Activation by Dump - yomgui - 01-11-2022
(01-11-2022, 08:43 AM)willy16 Wrote: Hi All!Hi mate,
My costumer bring me a Berlingo B9 1.6HDi From 2010 with EDC16C34 for installing CC.
I installed the cruise control switch, activated in BSI then tried in ECU too without succes....
Tried with Diagbox 7.66 and 9.129, every time give error message "Configuration failure". Like as P. Partner same result.
Than I tried switch on in flash dump without succes.
Somebody know what the hell could this be and activate somehow?!
Best Regards.
With Launch X431 Pro3 succesfully coded to Present RVV (CC).
I modifie your file for activation on DiagBox.
Test it and send me a backreturn.
Ps: Did you install an accelerator pedal with a hard point ?