Mercedes Benz Keys Service From EIS/EZS - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Mercedes Benz Keys Service From EIS/EZS (/showthread.php?tid=7169) |
RE: Mercedes Benz Keys Service From EIS/EZS - Regis599 - 05-08-2017 (05-08-2017, 00:12 AM)volavka Wrote:(04-08-2017, 21:49 PM)Regis599 Wrote: Thanks for your work, but would you attach it again? Is giving error in rar file. That was exactly it, my winrar was outdated. Unfortunately I will back working in the car in a month, but as soon as I do I will post the final result. Thank you again. RE: Mercedes Benz Keys Service From EIS/EZS - Regis599 - 22-09-2017 (05-08-2017, 16:14 PM)Regis599 Wrote:(05-08-2017, 00:12 AM)volavka Wrote:(04-08-2017, 21:49 PM)Regis599 Wrote: Thanks for your work, but would you attach it again? Is giving error in rar file. I have a doubt, I have been writing an MCU again and with an error, just in the first line of the file, instead of 'FE' is 'FF', is this normal? What should I do? In the image I put the error that happens in xprog at the time of write, and in the software 'compare files', on the left is the file that you provided me, on the right is the file after write and read again on xprog RE: Mercedes Benz Keys Service From EIS/EZS - volavka - 22-09-2017 (22-09-2017, 23:44 PM)Regis599 Wrote: I have a doubt, I have been writing an MCU again and with an error, just in the first line of the file, instead of 'FE' is 'FF', is this normal? What should I do? that's happened because xprog fw not good after appear message verify error , just click no ..and re write again , may need several time to try then should work Good luck RE: Mercedes Benz Keys Service From EIS/EZS - Regis599 - 23-09-2017 (22-09-2017, 23:55 PM)volavka Wrote:(22-09-2017, 23:44 PM)Regis599 Wrote: I have a doubt, I have been writing an MCU again and with an error, just in the first line of the file, instead of 'FE' is 'FF', is this normal? What should I do? I tried several times, without success. Is there any chance of it working out even with this mistake? I'm using windows 7, trying with windows xp would change anything? RE: Mercedes Benz Keys Service From EIS/EZS - fluorescent - 25-09-2017 Hello, i have a a class w169 wit EIS 1695451308 , my question and problem is : can i program a motorola old key instead Nec one that is having right now? The Nec one is dead. here the EIS dump read it by xprog. RE: Mercedes Benz Keys Service From EIS/EZS - volavka - 25-09-2017 (25-09-2017, 16:42 PM)fluorescent Wrote: Hello, i have a a class w169 wit EIS 1695451308 , my question and problem is : i dont undestand your question Here anyway unused nec keys RE: Mercedes Benz Keys Service From EIS/EZS - fluorescent - 25-09-2017 (25-09-2017, 16:56 PM)volavka Wrote:(25-09-2017, 16:42 PM)fluorescent Wrote: Hello, i have a a class w169 wit EIS 1695451308 , my question and problem is : What i am try to say is ,that the car have originaly a Nec small key,but broken, and i have here 2 keys with motorola inside chip, from scrapyard, there is posible to reprogram this type of key tothe car EZS? Sorry i am green in this world. Is this Motorola key OTP or can be reprogramed? Thanks. RE: Mercedes Benz Keys Service From EIS/EZS - volavka - 25-09-2017 (25-09-2017, 17:05 PM)fluorescent Wrote: What i am try to say is ,that the car have originaly a Nec small key,but broken, and i have here 2 keys with motorola inside chip, from scrapyard, there is posible to reprogram this type of key tothe car EZS? xprog is good for motorola hc05e6,, you can read/write without Problem , just lift up Pin 1 ,, use xprog manual for pinout attached Motorola keys RE: Mercedes Benz Keys Service From EIS/EZS - fluorescent - 26-09-2017 (25-09-2017, 17:30 PM)volavka Wrote:(25-09-2017, 17:05 PM)fluorescent Wrote: What i am try to say is ,that the car have originaly a Nec small key,but broken, and i have here 2 keys with motorola inside chip, from scrapyard, there is posible to reprogram this type of key tothe car EZS? Thanks a lot for your help. So i program the key with one of the files that you provide and ready to start? Do i need to make something to the EIS dump? RE: Mercedes Benz Keys Service From EIS/EZS - volavka - 26-09-2017 (26-09-2017, 08:18 AM)fluorescent Wrote: Thanks a lot for your help. Don't touch eis ,, just write Key which i send you and start Good luck |