Solved ✔ Cas4 issue - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ Cas4 issue (/showthread.php?tid=80439) |
Cas4 issue - jaramillo - 24-06-2023 Hello all, I was making a key for cas4 (F25). Was updating that module but fail with a swfl file multiple times, so I dediced to get the cas at bench, took out plastic cover and found a can filter emu for km... At the end I finished cloning that cas to an other one, so I need to recover cas, because one electronic component was removed from the board Im not an electronic expert. My main objective is to get some help to identify the missing component I must install again Enclosed is a photo showing the missing component Thanks RE: Cas4 issue - cipi gutuie - 24-06-2023 [attachment=165493 Wrote:jaramillo pid='625683' dateline='1687572830']Hello all, Just make 2 bridge on board RE: Cas4 issue - brag288 - 24-06-2023 (24-06-2023, 02:13 AM)jaramillo Wrote: Hello all,One more reason to do all on bench with programmer. That is a can filter,just bridge the pads as mentioned above and all good RE: Cas4 issue - jaramillo - 24-06-2023 Thanks all for the response. all was solved, cas back to life |