+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? (/showthread.php?tid=81993)
Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? - ROD-BENDERS - 08-08-2023
Hi experts
Post your experiences with this tool and please give as much info as possible.
Costs around $155 usd with tax and delivery.
Informative posts always get thnks and rep from me.
Br
Close AmtBst.exe (close this tool)
Do not share this file !
You know what you have to do before you pm the for password
Br
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - Rudkinp - 08-08-2023
I have AMT BST clone which look's like genuine.
Works fine, no issues with EDC17 and MEV17.
Never had a problem, did many of them.
I've also readed few MD(G)1 - some of them was read good some had too new TPROT and couldn't be read.
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - gpdriver - 11-08-2023
have also
just for fun ,but have to tell that is very quick
and for fast job this tool is first on bench
))
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - ROD-BENDERS - 11-08-2023
(11-08-2023, 12:48 PM)gpdriver Wrote: have also
just for fun ,but have to tell that is very quick
and for fast job this tool is first on bench
I have just aquired it mainly for edc16 and med9 full reads without opening ecu... however i have not had chance to test it yet.
Looks good though.
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - Mertim - 11-08-2023
I have used it with the clone, of the clone : Fetrotech.
You either can do a license with the chinese manufacturer, or you can use a up to date cracked version developed for the Fetrotech.
Its a good device but has flaws. I've seen people writing wrong files with it, since it has no checksum calculation which bricks the device.
Its better to buy a good clone and do a rework so it works good for ME9 ecu's and stuff.
There are good clones for around 150 - 200 €.
Hit me up if anyone needs a good clone, i can provide a reworked set of amt bst.
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - gabivw - 11-08-2023
I have both device
Gold box and black box
Gold box is with reset switch (firmware)
Tested on Edc17 Edc16 w/r ok
Pcr 2.1 not work
Both device not work with
Kia edc17cp14 tprot 11
Black Box is without switch
But can r/w pcr2.1 bench
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - ROD-BENDERS - 11-08-2023
(11-08-2023, 14:44 PM)gabivw Wrote: I have both device
Gold box and black box
Gold box is with reset switch (firmware)
Tested on Edc17 Edc16 w/r ok
Pcr 2.1 not work
Both device not work with
Kia edc17cp14 tprot 11
Black Box is without switch
But can r/w pcr2.1 bench
This version does not have a reset button.... it has A+ chips and spelling mistakes
Br
RE: Ecu Bench Tool (AMT BST Clone) what do you think ? - ROD-BENDERS - 15-08-2023
Tested today
VW PCR2.1 CAYD
read MCUID and FULL FLASH file without opening ecu all perfect
No choice available to read eprom just full flash (enough data for immo off)
a nice surprise
Br
RE: Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? - danny677 - 16-08-2023
Hi,
my experience:
edc17cp09 BMW R/W ok - checksum included
edc17C50 BMW R/W ok - checksum included
MD1CP004 AUDI A5 F5 R/W ok incl. chks
MD1CS004 AUDI A3 8Y R/W ok incl. chks
RE: Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? - srzar - 16-08-2023
hello
i have amt bst black clone
tested in lot of edc16, edc17, and pcr 2.1, and md1 psa, md1 renault, and md1 from bmw with no open ecu, very happy with it, dont remember exacly md1, mdg1 or mg1..... can search exact ecu if important to someone, but works ok on new ecus
found some pinouts wrong, better use the pinouts from pcmflash, in the official webpage can download the pdf on download section, for edc17/med17 mudule 71 on pcmflash, and for edc16 use module77 pcmflash
with edc17c60 psa, need to disable tprot and some md1 mg1 needs disable tprot too
the tips
no update on internet, result locked device... that was the first one i have
be especially careful that the cables that you do not connect do not touch the ecu, result device dies, my second device.....
waiting for the third device,
there is a mod, adding a capacitor to make more stabe the device, in some edc16c39, before putting that capacitor, dont have id on ecu, after put that capacitor, can make id r/w without issues
is good, except with med9, here haves problems to read/write in lot of them
if someone need something about that device, i have the soft and schematic diagrams
i hope it helps. best regards