+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G11 FRR programing error (/showthread.php?tid=82887)
G11 FRR programing error - qbek90 - 03-09-2023
Hi,I changed FRR in G11,old was damaged after car crasch.I need programed FRR,but i have error in progress programing.
RE: G11 FRR programing error - PsevDo - 03-09-2023
select correct shipment of the car, also use more recent pszdata
RE: G11 FRR programing error - DEJMIEN - 03-09-2023
Target give you different btld and swfl, that’s mean you didn't get the same radar for G11 or or your VO/shipment is no good, yes I see that hw matches but that's only because you hit hw-id's button. Your shipment is the same as your target!
RE: G11 FRR programing error - Node - 03-09-2023
Actual bootloader is from non-LCI car. Target bootloader is LCI. HWEL was same on both. I'm just not sure you can reflash non-LCI to NEWEST LCI which had newer hardware. Either that or new FRR has faulty flash memory.
P.S. Try to choose any of 20-11-xxx factory level and see if your calculation changes, as those were the only LCI ones which had this EXACT HWEL.
RE: G11 FRR programing error - qbek90 - 03-09-2023
Car is construction data 19/07,I done calculation for two I-level factory
Update,now I calculated for shipment 18-11-530,target SWFL is another,but number BTLD,still is the same
RE: G11 FRR programing error - DEJMIEN - 04-09-2023
I checked that and his radar is FRR-02 even though hw is the same he still needs another ''FRR-02-SP18'' radar which means that it is not possible to flash PRE-LCI radar to LCI SP18, unless there is a magician here who can figure it out.
RE: G11 FRR programing error - maksymw - 08-09-2023
I already tried to make FRR-02 on FRR-02-SP18. Don't try to do this. My two attempts killed two radars, after that there was no communication with ecu in Esys...
I don't think anyone has managed to do it.
RE: G11 FRR programing error - Ghostly - 09-09-2023
(08-09-2023, 10:51 AM)maksymw Wrote: I already tried to make FRR-02 on FRR-02-SP18. Don't try to do this. My two attempts killed two radars, after that there was no communication with ecu in Esys...There is a guy that recovers them with programmer.
Looking for a solution too, processor seems to be protected with password.
RE: G11 FRR programing error - qbek90 - 11-09-2023
Hi,I changed FRR for LCI and is OK.
Thx all.