+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Which tools for frm3 and cas3? (/showthread.php?tid=84204)
Which tools for frm3 and cas3? - liviu2004 - 09-10-2023
Which original tools can reliable and stable read and write frm3 and cas3? Does it require external supply or is usb sufficient?
So far tried original upa usb, clone xprog and clone orange5 with no luck and I’m sick and tired of the clones.
RE: Which tools for frm3 and cas3? - tigre - 09-10-2023
can use vvdi prog and autel
RE: Which tools for frm3 and cas3? - zero9 - 09-10-2023
vvdi prog relatively cheap and reliable for these works.
RE: Which tools for frm3 and cas3? - liviu2004 - 09-10-2023
Autel cannot do, once the frm3 cannot comm due to corrupt frm3 eeprom. Thanks for message.
RE: Which tools for frm3 and cas3? - Spitfire555 - 10-10-2023
Alternatively ..... XProg, CG Pro, ...
RE: Which tools for frm3 and cas3? - user0086 - 10-10-2023
UPA original works perfectly on FRM3 imho, but CAS is not really possible without third party upgrade.
Clone Xprog works well on CAS if you use 5.51 firmware.
RE: Which tools for frm3 and cas3? - muskatas - 10-10-2023
(10-10-2023, 04:47 AM)Spitfire555 Wrote: Alternatively ..... XProg, CG Pro, ...
As far as have enough expirience with CG pro is shit with frm. What sequence u use with cg? because for me is not comfortable at all and plus you need to solder one more wire on different side of board.
RE: Which tools for frm3 and cas3? - liviu2004 - 10-10-2023
user0086 dateline='[url=tel:1696915622' Wrote: 1696915622[/url]']
UPA original works perfectly on FRM3 imho, but CAS is not really possible without third party upgrade.
Clone Xprog works well on CAS if you use 5.51 firmware.
I have original upa and its shit with frm3, every verify results in tons of errors.
Vvdi prog, which the original website to buy from?
Xprog 5.55 clone is shit with everything, I have 0% success rate with any processor.
RE: Which tools for frm3 and cas3? - PsevDo - 10-10-2023
hexprog my favourite for those jobs
RE: Which tools for frm3 and cas3? - AbelF10 - 10-10-2023
HEXTAG HEXPROG ARE THE MOST STABLE