+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Crafter EDC17C54 speed limiter off (/showthread.php?tid=87241)
Crafter EDC17C54 speed limiter off - Moldovan1 - 03-01-2024
Hi! And happy New Year!
Please can somebody ckeck my solution for speed limiter (by law!) off on this Crafter with EDC17C54.
Thanks in advance!
RE: Crafter EDC17C54 speed limiter off - Tscheppo - 03-01-2024
The limiter is set at 165km/h.
do you want it off?
RE: Crafter EDC17C54 speed limiter off - Key1 - 03-01-2024
he switched maximum speed limitter off in his file.
normally its enough
but he has a speed limitter by law he may need different solution
RE: Crafter EDC17C54 speed limiter off - Tscheppo - 03-01-2024
your file is ready.
Speed limit of 250 km/h.
Please give thanks and Rep.
Pass via PM
RE: Crafter EDC17C54 speed limiter off - Moldovan1 - 04-01-2024
Thanks to all! Today my friend do not give feedback how fast run his Crafter!
I think all is ok. By feedback I will updated this post.
Thanks again!
@key1 Yes, it is speed limiter by law, not by user. By user is simply to change with Vcds.
If my friend report that file do not work - do you have another solution?
@Tscheppo Mate, forgot to say - ori file have limiter to 90 km/h (checked with VCDS). I remove limiter by switch and also CAN mesage "Limiter aktiv". Also I think that speed limit value is set in eeprom (in my case 90 kmh).