+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ENAV2 bench activation (/showthread.php?tid=87608)
Pages:
1
2
ENAV2 bench activation - Airbus - 13-01-2024
Hey folks,
there are some guys here who say they can activate the ENAVEVO on bench.
I tried it several times but its not workin for me.
The FSCs are rejected after around 90s or after reboot!
I have a ZGW with clamp emulator and wiring for HU, ZBE, KOMBI and ATM
Would be nice to find a work around
cheers
RE: ENAV2 bench activation - alexnaoumov - 14-01-2024
Entrynav2 needs bdc or fem for verification. So patch and load fsc’s on bench and install in car.
RE: ENAV2 bench activation - Airbus - 15-01-2024
(14-01-2024, 08:39 AM)alexnaoumov Wrote: Entrynav2 needs bdc or fem for verification. So patch and load fsc’s on bench and install in car.
I tried this way! patching and loading was done BUT the FSCs keep rejecting anyway.
And this happend when EntryNav is installed in BDC car or stays bench on ZGW.
After reset reject!
I did not find a solution and the developer of the HUtool says that it is not possible, too....
I cant believe someone can do it bench!
RE: ENAV2 bench activation - sameur10 - 15-01-2024
Yes
dont believe ,wont WORK
RE: ENAV2 bench activation - BugFix - 15-01-2024
ID 380 - DLC = 7, Data = Last 7 of the VIN for Enav2
RE: ENAV2 bench activation - Airbus - 15-01-2024
(15-01-2024, 21:37 PM)BugFix Wrote: ID 380 - DLC = 7, Data = Last 7 of the VIN for Enav2
Can you describe that for me?
RE: ENAV2 bench activation - zero9 - 15-01-2024
can id, its length and hex data.
RE: ENAV2 bench activation - Mwahab - 16-01-2024
or maybe u just need to connect the kombi))
RE: ENAV2 bench activation - parzo93 - 23-02-2024
(15-01-2024, 21:17 PM)sameur10 Wrote: Yes
dont believe ,wont WORK
Here the demostration of the opposite.
Bench activation. Installed on the car and all works fine. Done yesterday.
RE: ENAV2 bench activation - ruben_17non - 25-02-2024
Entrynav2 with way map, exist fsc patch for carplay??