CarTechnoloGY
R56 080D0WQ eeprom virgin read needed - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: R56 080D0WQ eeprom virgin read needed (/showthread.php?tid=87610)

R56 080D0WQ eeprom virgin read needed - Fordy51 - 13-01-2024

hi,


i read this file via acdp clip on but not sure if corrupt

acdp fail to FF mileage 
Vin can be FF


Did manage to get 0001 stored in first mileage location, acdp said mileage is 1km
Soldered chip back on

Powered on bench 12v and Ground only. 
Dash display 999999 and flashing tamper dot

RE: R56 080D0WQ eeprom virgin read needed - ProElectronicZR - 14-01-2024

If it's of any use here's the same vehicle eeprom read with HexProg with mileage of 174,000km.
HEXPROG_080D0WQ_MOD_174000km.zip
File Type: .zip
Downloaded: 7 times
Size: 772 bytes



RE: R56 080D0WQ eeprom virgin read needed - SINSET - 14-01-2024

(13-01-2024, 23:16 PM)Fordy51 Wrote:  hi,


i read this file via acdp clip on but not sure if corrupt

acdp fail to FF mileage 
Vin can be FF


Did manage to get 0001 stored in first mileage location, acdp said mileage is 1km
Soldered chip back on

Powered on bench 12v and Ground only. 
Dash display 999999 and flashing tamper dot

For R56 need to change in CAS3 for write 35080 need a good tool. R270 will do. your file have 164365.

RE: R56 080D0WQ eeprom virgin read needed - Fordy51 - 14-01-2024

Problem is someone used autel on this car

But this car had a dme/cas/kombi change previously

Autel programmed and put original vin of car sticker into kombi and red dot present

Just needed vin clearing but now im experimenting getting mileage zero and virgin unit