+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: FRM3 D-Flash empty (/showthread.php?tid=87780)
FRM3 D-Flash empty - OviECU - 18-01-2024
Hi guys, i've searching on the forum for a while but i can't find anything to solve my problem, my D-Flash showing a single line on vvdi (00 01 02 03 04 05... and so on) have a 6135 9308371-01, any help is apreciated
EEE seems ok, same as p-flash, d-flash is 0 bytes tho.
RE: FRM3 D-Flash empty - papachivas - 18-01-2024
You don't have d-flash problems Does your FRM respond when installed in the vehicle?
RE: FRM3 D-Flash empty - Arturino - 19-01-2024
If the FRM is properly partitioned, you should not have d-flash. As long as your eeprom is ok, then the FRM is OK.
RE: FRM3 D-Flash empty - jaki - 19-01-2024
(19-01-2024, 03:28 AM)Arturino Wrote: If the FRM is properly partitioned, you should not have d-flash. As long as your eeprom is ok, then the FRM is OK.
Well, not necessary. I have had caseds where FRM respons correctly but there are mysterious failures and only eee reflash have helped.
RE: FRM3 D-Flash empty - OviECU - 19-01-2024
(18-01-2024, 22:18 PM)papachivas Wrote: You don't have d-flash problems Does your FRM respond when installed in the vehicle?
It is... but i have issues with angel lights and rear position light with flickering, i had issues with the rear windows but no longer since i have flashed an eeprom for 6135 9308374 (mine ends with 8371, cant find a dump for mine) 6135 930837
(19-01-2024, 03:28 AM)Arturino Wrote: If the FRM is properly partitioned, you should not have d-flash. As long as your eeprom is ok, then the FRM is OK.
I think so... wrote partition with 16sectors for EEE and 0 for D-flash, wrote EEE, and then wrote P-flash (which said i had mismatch size if i recall correctly, pressed 'yes' and had it done anyways), im a bit newbie so bare with me, thanks for the replies!