+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Pinout MS6.3 Renault Premium (/showthread.php?tid=89930)
Pages:
1
2
Pinout MS6.3 Renault Premium - modhigh98 - 10-03-2024
Hello! Someone who can help me with pinout for Renault Premium 270DCI - 0 281 010 966 - PART NUMBER?
RE: Pinout MS6.3 Renault Premium - al70 - 10-03-2024
Here you go
check this link
https://cartechnology.co.uk/showthread.php?tid=76537
RE: Pinout MS6.3 Renault Premium - modhigh98 - 10-03-2024
(10-03-2024, 18:13 PM)al70 Wrote: Here you go
check this link
https://cartechnology.co.uk/showthread.php?tid=76537
not work..
RE: Pinout MS6.3 Renault Premium - al70 - 10-03-2024
should work, what voltage are you giving it ? try 13v
RE: Pinout MS6.3 Renault Premium - modhigh98 - 10-03-2024
(10-03-2024, 18:42 PM)al70 Wrote: should work, what voltage are you giving it ? try 13v
i tried with 11.9-12.10 i will put with 24v.
You tried this with kess 2 in bench mode?
RE: Pinout MS6.3 Renault Premium - al70 - 10-03-2024
i've never read this ecu before, i'm not sure if you must give 24v on the bench, wait for someone else to verify
RE: Pinout MS6.3 Renault Premium - modhigh98 - 10-03-2024
Tried again 24v not work….
Wake-up error.
Also from bench diagram mine is different.
RE: Pinout MS6.3 Renault Premium - al70 - 10-03-2024
maybe kess is no good for this ecu, how many amps are you adding ?
RE: Pinout MS6.3 Renault Premium - modhigh98 - 10-03-2024
(10-03-2024, 19:32 PM)al70 Wrote: maybe kess is no good for this ecu, how many amps are you adding ?
Is good watch this: https://youtu.be/JWPPBkyybuc?si=6zqSGlO0bE6uJrvg
RE: Pinout MS6.3 Renault Premium - al70 - 10-03-2024
wait for someone else to confirm, i'm not sure about adding 24v on the bench, if kess ktag with truck protocols, theres only 12volt power supply supplied with tools
thats crazy adding 24 volts to ecu when you're not sure man