CarTechnoloGY
meriva pincode denso 1.7cdti - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: meriva pincode denso 1.7cdti (/showthread.php?tid=90521)

Pages: 1 2

meriva pincode denso 1.7cdti - fluorescent - 25-03-2024

MERIVA.rar
File Type: .rar
Downloaded: 12 times
Size: 391 bytes

hi all .
 someone provide pincode frome dump car opel meriva 1.7 cdti ecu denso?
is enough clone eprom content to start car
or need virginize and coding?thx

RE: meriva pincode denso 1.7cdti - pinotec - 25-03-2024

both metod is ok
this read is crypted.. read with tool kt200 ?

RE: meriva pincode denso 1.7cdti - fluorescent - 26-03-2024

(25-03-2024, 17:44 PM)pinotec Wrote:  both metod is ok
this read is crypted.. read with tool kt200 ?

iss read on circuit upa programmer

RE: meriva pincode denso 1.7cdti - lupu_sandu - 26-03-2024

read as x16 not as x8

RE: meriva pincode denso 1.7cdti - fluorescent - 26-03-2024

(26-03-2024, 12:48 PM)lupu_sandu Wrote:  read as x16 not as x8

here read as 16
MERIVA 93c66 x16.rar
File Type: .rar
Downloaded: 6 times
Size: 442 bytes



RE: meriva pincode denso 1.7cdti - dabaca - 26-03-2024

(26-03-2024, 14:08 PM)fluorescent Wrote:  
(26-03-2024, 12:48 PM)lupu_sandu Wrote:  read as x16 not as x8

here read as 16
Pin: 8513 VIN: W0L0XCE7544391381

RE: meriva pincode denso 1.7cdti - fluorescent - 26-03-2024

(26-03-2024, 14:53 PM)dabaca Wrote:  
(26-03-2024, 14:08 PM)fluorescent Wrote:  
(26-03-2024, 12:48 PM)lupu_sandu Wrote:  read as x16 not as x8

here read as 16
Pin: 8513        VIN: W0L0XCE7544391381

programing new ecu with old data from 93c66 not start immo active
the content of donor eeprom ecu is like this, mabe reseted ?
DONOR MERIVA 93c66 x16.rar
File Type: .rar
Downloaded: 6 times
Size: 300 bytes



RE: meriva pincode denso 1.7cdti - dabaca - 26-03-2024

(26-03-2024, 17:27 PM)fluorescent Wrote:  
(26-03-2024, 14:53 PM)dabaca Wrote:  
(26-03-2024, 14:08 PM)fluorescent Wrote:  
(26-03-2024, 12:48 PM)lupu_sandu Wrote:  read as x16 not as x8

here read as 16
Pin: 8513        VIN: W0L0XCE7544391381

programing new ecu with old data from 93c66 not start immo active
the content of donor eeprom ecu is like this, mabe reseted ?
No pin in donor ecu -wrong file.

RE: meriva pincode denso 1.7cdti - fluorescent - 26-03-2024

(26-03-2024, 19:02 PM)dabaca Wrote:  
(26-03-2024, 17:27 PM)fluorescent Wrote:  
(26-03-2024, 14:53 PM)dabaca Wrote:  
(26-03-2024, 14:08 PM)fluorescent Wrote:  
(26-03-2024, 12:48 PM)lupu_sandu Wrote:  read as x16 not as x8

here read as 16
Pin: 8513        VIN: W0L0XCE7544391381

programing new ecu with old data from 93c66 not start immo active
the content of donor eeprom ecu is like this, mabe reseted ?
No pin in donor ecu -wrong file. If the two ECUs are the same, write the eeprom from old to new ECU.    Remember there are two buttons and it takes seconds. Everyone gives their time to help.

ecu donor is denso 112500-0201 isuzu 898000-3221
ecu original is denso 112500-0164 issuzu 897350-9486 

i think are compatible
already swap data from old to new but immo flashing
also i think i have security time wait active 
i let it this night with power

RE: meriva pincode denso 1.7cdti - dabaca - 26-03-2024

(26-03-2024, 19:13 PM)fluorescent Wrote:  
(26-03-2024, 19:02 PM)dabaca Wrote:  
(26-03-2024, 17:27 PM)fluorescent Wrote:  
(26-03-2024, 14:53 PM)dabaca Wrote:  
(26-03-2024, 14:08 PM)fluorescent Wrote:  here read as 16
Pin: 8513        VIN: W0L0XCE7544391381

programing new ecu with old data from 93c66 not start immo active
the content of donor eeprom ecu is like this, mabe reseted ?
No pin in donor ecu -wrong file. If the two ECUs are the same, write the eeprom from old to new ECU.    Remember there are two buttons and it takes seconds. Everyone gives their time to help.

ecu donor is denso 112500-0201 isuzu 898000-3221
ecu original is denso 112500-0164 issuzu 897350-9486 

i think are compatible
already swap data from old to new but immo flashing
also i think i have security time wait active 
i let it this night with power
You saved the 93c66 from new ecu before writing 93c66 from the old one?