+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ W906 EZS A9069050600 (/showthread.php?tid=90588)
W906 EZS A9069050600 - epasha - 26-03-2024
Hello everyone
I have an EZS module with number A9069050600 that does not recognize that the key is inserted.
I found another EZS with a number A9069008700.With autel IM608 i read the old module and transferred the data from the old module to the donor but it doesn't want to start the processors are the same.How can i know if the two modules are compatible or should the numbers be the same. They build the same hardware.I would be very grateful if someone could help meл
RE: W906 EZS A9069050600 - pepi - 26-03-2024
Check the MCU mask if there are the same nr.
RE: W906 EZS A9069050600 - epasha - 26-03-2024
EZS A9069050600 - mask is 0L01Y
I haven't soldered the EZS A9069008700 donor, I don't know what mask it is, the information I find on Google is that this module has the same mask 0L01Y
RE: W906 EZS A9069050600 - raffy haddad - 26-03-2024
Sorry for that question but what type key already is and is it working in first maybe bad key ,
Regards
RE: W906 EZS A9069050600 - epasha - 26-03-2024
Hi the car has two keys the key does not have a mechanical spring , the keys work but when the key is inserted in EZS when I look at live data EZS it does not report that there is a key inserted.
The button that presses the mechanism when the key is inserted works.
When cloning E should eprom and flash be copied or only eprom
RE: W906 EZS A9069050600 - pepi - 27-03-2024
You better clone booth of them .
RE: W906 EZS A9069050600 - epasha - 27-03-2024
I clone EEPROM and FLASH but not work EZS
RE: W906 EZS A9069050600 - raffy haddad - 31-03-2024
The problem have been solved by programming new key but member is too lazy to report back only when he need help