+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Adapt second kessy continetal 3D0909139D (/showthread.php?tid=90617)
Adapt second kessy continetal 3D0909139D - bboctavian - 27-03-2024
Hello, i have a vw phaeton with kessy continental ecu nr: 3D0 909 139D
i buy second hand kessy with same nr, read both with VVDI prog (the old ecu is damage by water) how can i adapt?
Old ecu: 3D0 909 139D
PIN: 17695
CS: 96 03 D1 56 40 F2 EB
New ecu: 3D0 909 139D
PIN: 56357
CS: 83 5C D9 D2 68 81 42
I upload both read from ori and donator ecu.
I have vcds ori, key tool pad, svci 2020
thanks
RE: Adapt second kessy continetal 3D0909139D - raffy haddad - 27-03-2024
You should be able to do with key pad but you need mac and power class
Choose adaptation on your key pad and check
Regards
Ps continental need read in circuit
RE: Adapt second kessy continetal 3D0909139D - bboctavian - 27-03-2024
On key tool plus can't find function about adaption or renew kessy.. just to add key
Yes is read in circuit with vvdi prog
RE: Adapt second kessy continetal 3D0909139D - raffy haddad - 27-03-2024
I have vvdi2 and exist on on key tab same functions asvvdi2 should be
On special function
RE: Adapt second kessy continetal 3D0909139D - bboctavian - 28-03-2024
In xhorse key tool plus is nothing about that, i think just on vvdi2 is.
I have somethink in avdi but ask me about power class of the ecu. can i read the power class from the engine ecu with vcp ? or need to read full backup ?
RE: Adapt second kessy continetal 3D0909139D - raffy haddad - 28-03-2024
With vcp expert who use vcp can advise
Personally not have vcp
RE: Adapt second kessy continetal 3D0909139D - bboctavian - 29-03-2024
I manage to get a autel to make the swap, but i can't wake up the ecm ecu and i need the power class of the engine ecu...
autel ask me about the power class of the ecu..
how can i wake up engine ecu ?
I upload full read of ecm eeprom and flash can someone help me with power class ?