VAG DCM6.2 fix after wrong flash file - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: VAG DCM6.2 fix after wrong flash file (/showthread.php?tid=91096) Pages:
1
2
|
VAG DCM6.2 fix after wrong flash file - ELMEPRO - 08-04-2024 Holla, today is my mistake day, its my own VW Crafter i accidently flashed wrong file, good new is that is from same engine and ecu but diffrent sw part nummber, i cant flash ori because pcmflash show me that there are imo failure, what shuld be my next move? ori 04L906056SK flashed 04L906056KL Ecu is not dead, look like long code is gone I have Pcmflash and vvdiprog. Is it WORTH to try geko? i have hard feeling that geko will refuse because off different soft. RE: VAG DCM6.2 fix after wrong flash file - MahoJohn - 08-04-2024 (08-04-2024, 10:25 AM)ELMEPRO Wrote: Holla, today is my mistake day, its my own VW Crafter i accidently flashed wrong file, good new is that is from same engine and ecu but diffrent sw part nummber, i cant flash ori because pcmflash show me that there are imo failure, what shuld be my next move? hi, read the ecu in boot, upload here i will help you, geko will not help you. RE: VAG DCM6.2 fix after wrong flash file - sivyx - 09-04-2024 Why geko?? If it have communications use odis e with frf file from MahoJohn. BTW I don't understand why there's a need to password-protect publicly accessible files?? You can finde it in flashdaten on vag subforum. RE: VAG DCM6.2 fix after wrong flash file - MahoJohn - 09-04-2024 (09-04-2024, 04:38 AM)sivyx Wrote: Why geko?? If it have communications use odis e with frf file from MahoJohn. BTW I don't understand why there's a need to password-protect publicly accessible files?? You can finde it in flashdaten on vag subforum. hi, if you flash wrong frf file to dcm6.2 the ecu will block, the immo is damage, and without right immo you cant via obd nothing, maybe if you adapt the immo with geko you are again able to write via obd, but the car still wouldn't start without the correct frf file, and then you can try to write the correct frf file on it read via boot, then correcting the file is the best solution, which I personally have done successfully ohh, really you find the frf file? so upload it. RE: VAG DCM6.2 fix after wrong flash file - dimitar - 09-04-2024 Frf update via odis engineering doesnt touch immo even if you flash wrong software RE: VAG DCM6.2 fix after wrong flash file - sivyx - 10-04-2024 FL_04L906056SK_9970__V001 FL_04L906056SK_9971__V001 FL_04L906056SK_9973__V001 MahoJohn overall he's right.. But just try with odis-e nothing to lose.. RE: VAG DCM6.2 fix after wrong flash file - ELMEPRO - 10-04-2024 INFO im waiting for mdflash to do bsl Immo is defective i tried geko it refuse. If immo defective or ecu locked fault, you cant flash it even trought odis e RE: VAG DCM6.2 fix after wrong flash file - MahoJohn - 10-04-2024 (10-04-2024, 06:25 AM)ELMEPRO Wrote: INFO if you read read via boot (flex and kess do it) or bench (kess do it) upload file here i will repair file RE: VAG DCM6.2 fix after wrong flash file - sivyx - 10-04-2024 Dfox and fgtech via bench too.. Tagflash have boot in list.. RE: VAG DCM6.2 fix after wrong flash file - ELMEPRO - 19-04-2024 SOLVED Fixed file and didn't even needed geko, had long code backup everything ok! |