+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: GRO 002 JAPAN 1215 eeprom (/showthread.php?tid=9790)
Pages:
1
2
GRO 002 JAPAN 1215 eeprom - pilif - 04-09-2015
I have already on the internet searched but no response.
As what can i read and write this type of eeprom.
From an Opel SC 303 B Grundig GM0303B3228303
i may also need an dump for it. because i think that i have erased the chip. ihihihi
RE: GRO 002 JAPAN 1215 eeprom - rabihr - 04-09-2015
(04-09-2015, 12:49 PM)pilif Wrote: I have already on the internet searched but no response.
As what can i read and write this type of eeprom.
From an Opel SC 303 B Grundig GM0303B3228303
i may also need an dump for it. because i think that i have erased the chip. ihihihi
RE: GRO 002 JAPAN 1215 eeprom - pilif - 04-09-2015
On display i am having now " Er2 "
i have tryied whit both dumps, but nothing.
RE: GRO 002 JAPAN 1215 eeprom - Shooting - 04-09-2015
(04-09-2015, 18:29 PM)pilif Wrote: On display i am having now " Er2 "
i have tryied whit both dumps, but nothing.
What chip are you reading? Numbers?
You may be reading the wrong chip...
wbr
RE: GRO 002 JAPAN 1215 eeprom - pilif - 04-09-2015
Thats what i am seeing.
RE: GRO 002 JAPAN 1215 eeprom - Shooting - 04-09-2015
(04-09-2015, 21:54 PM)pilif Wrote: Thats what i am seeing.
What chip did you read? Post numbers here...!
This is not a normal 303 unit, its a version B
wbr
RE: GRO 002 JAPAN 1215 eeprom - pilif - 04-09-2015
I have specified the numbers .
RE: GRO 002 JAPAN 1215 eeprom - Shooting - 04-09-2015
(04-09-2015, 22:13 PM)pilif Wrote: I have specified the numbers .
Write this as 93C46 - code 1120
wbr
RE: GRO 002 JAPAN 1215 eeprom - pilif - 09-09-2015
Hi again.
Sorry for long absence.
I have tryied the dumps but no success. Still Er2 on display.
Can be the chip broken? If i want to try whit another one, must be the same? Or i can try whit an equivalent? if yes... which type schould i use?
Thanks a lot.
RE: GRO 002 JAPAN 1215 eeprom - sanix - 09-09-2015
(09-09-2015, 17:48 PM)pilif Wrote: Hi again.
Sorry for long absence.
I have tryied the dumps but no success. Still Er2 on display.
Can be the chip broken? If i want to try whit another one, must be the same? Or i can try whit an equivalent? if yes... which type schould i use?
Thanks a lot.
Hi! Try in new chip (93C46) write dump