[RENTRAFIC17]

Hi,

I have an issue with my 2017 Renault Trafic Bi-Turbo. I had a Plug and Play GAN tuning unit, that plugged into the Fuel Rail Sensor and MAP.

Not long after install it triggered a warning light - engine failure hazard CEL - P0005 

From all the research I've done it seems that the issue is EEPROM corruption -  Renault Trafic 1.6dci P0005 fault code and limp mode - Printable Version

Because the car is stuck in Limp mode my car was not doing regens so my DPF became blocked, so I removed it. So If possible could have that switched off and maybe a Stage 1 Tune. Thank you

If someone could please take a look for me and check everything is ok. Thank you

---

Happy to donate

[immokill]

RESET adapptives parameters via diag Can clip . Learn rrail componemts after RESET. TRAFIC III X82 tested.
On sone need same sw eeprom data and virgine it fix chks and write eep ..
Regards

[RENTRAFIC17]

Is there any other scan tool that will be able to scan and reset parameters? Thank you

Does my EEPROM look ok?

[immokill]

Same good tool can do it also. Will check eeprom .

[RENTRAFIC17]

Thank you Yeah If you could check EEPROM that would be awesome, and much appreciated

I'm seeing someone tomorrow with CLIP so I'll get him to reset fuel pressure and learn values.