[Yhoni]

Hello, I found this photo of someone is cloning a BSI EL3 of PSA with some unknow software for me. 

Does anyone knows which is the software that you can watch on the picture?

BR.

https://ibb.co/Fk9gkWWB

[danyparis]

Hello, I'm actually working on that.
I'm trying to create a Python script that works with the CMD.EXE command and the SM2 PRO VCI.
This will only be used to read/write the entire Flash memory on the pinout.

I'll post updates about this project on the forum.

[skens]

hi
if I do that, I find an identical bsi, with all the numbers!!! I transfer data from flash and eeprom x-tool
! Tried with something similar, but the car doesn't start and the wipers work all the time
regards

[danyparis]

hi
if I do that, I find an identical bsi, with all the numbers!!! I transfer data from flash and eeprom  x-tool
! Tried with something similar, but the car doesn't start and the wipers work all the time
regards

Hello, bad flash problem

I read BSI with FVDI 2018 on bench, i read it 3 times and after writing i read it again to compair data inside.
After this i do diagnostic on bench to be sure if the data is not corrupt.

[al70]

did you check the wiper motors, had same problem recently, changed bcm and ecu, last thing i checked was wiper motors, one was full of water