[Durba]

hi friends, i need help in cloning visteon dcu 101 or immo off if possible.
I have a Ford Transit van that arrived with a water-damaged ecu, and with it came a donor ecu with the same marking. I see on them that someone has already tried something, so I'm interested if someone can compare the files I read with those from the original ECU and the donor ECU. I don't know what would be the best option to get the van to start and run.
thanks in advance for your help.

Hw: 6c11-12B684-AB
Sw: 6c11-12K532-BS

[ziomski]

The best option too adapt immo is FORSCAN.
For immo off you need to use immo emulator, this is more expensive. With the same cost you can buy some forscan interface.

[Durba]

The best option too adapt immo is FORSCAN.
For immo off you need to use immo emulator, this is more expensive.  With the same cost you can buy some forscan interface.

then I would need a virgin file if someone can make me one of the donor file and then I will make an adaptation via forscan?

[ziomski]

The best option too adapt immo is FORSCAN.
For immo off you need to use immo emulator, this is more expensive.  With the same cost you can buy some forscan interface.

then I would need a virgin file if someone can make me one of the donor file and then I will make an adaptation via forscan?

You dont need a virgin file. Just put PCM at the car and then adapt it using PATS system.

[Durba]

Solved,many thanks user ziomski.