[vanderferdas]

Hi guys,

Have a Qahqai 2017 with tons of U1000-00 and U1000-01 can comunication problems, after read a lot of old post and checked everithing i can i think BCM is faulty (can gateway is integrated in it). I order a used one and checking MCU is labeled SC120534VLU6 with mask 0N13E and as i read is a mpc5606b 


It is correct is a mpc5606b ?
I want to try to clone it to the used one if possible (dont want to swap the wole processor, it has tons of "varnish" on it) and read with vvdi prog.


I imagine this mcu is protected so, in your experience is posible to unlock-read and then write to other one? anybody has diagram to connect it?


Any help will be much apreciated. Have a nice day

---

FOR INFORMATION, on other forum i found this diagram conection (LAST PICTURE), but as you can see is different board (first image is my board) so i imagine is not the same for me