[valentino88]

Hello i make to day km change but cluster show 999999after and now there is not whe to do can you tell me how to repair ot how is pins for digiprog St41 or what to do thanks alot

[skels]

Have You any motorola 912 programmer ??

[valentino88]

No i dint have anything

[darek_naprawa]

Description of the connection Audi dash MM for digiprog 3.
Use repair 999999.

[valentino88]

Do you know how it must look 41cables with pin outs becouse my is only black and red cabels doy ou have any pic how it must look with the good pind how mane cables to the green and blue how it must be thanks alot

[darek_naprawa]

Do you know how it must look 41cables with pin outs becouse my is only black and red cabels doy ou have any pic how it must look with the good pind how mane cables to the green and blue how it must be thanks alot

St41 diagram.

[valentino88]

My digi is not good ig i taiw vag K is it posible to read and after this write or i need to take motorola reader ?

Sent from my Lenovo A7020a48 using Tapatalk

[valentino88]

Do you know how it must look 41cables with pin outs becouse my is only black and red cabels doy ou have any pic how it must look with the good pind how mane cables to the green and blue how it must be thanks alot

St41 diagram.

[darek_naprawa]

Connect digiprog as described and use audi a3 repair 999999

[valentino88]

Itisnotwork
becouseofthisi.maskingisitposiblelikethis