[Capa81]

Good evening,


I need to replace a VW Golf 6 VDO instrument cluster. The original instrument cluster is not legible. I got a used instrument cluster. Can you help me with the VVDI2 procedure? Thank you

[KeeleyKaayz]

have you tried cloning?

Read eeprom and flash of old cluster and write to new cluster via OBD

[Capa81]

Hi,

Old instrument cluster not work

[KeeleyKaayz]

try adapt with оdї5 remotely , or if you dont have , you pull CS and Pin from ECU, pretty sure you need original CS and Pin and also CS and Pin from replacement Cluster to to do it

[spacewalker]

if old cluster lost - you need make new key
or , use оdї5 online and you can keep current keys

[Platone]

Hi, VVDI2 work this ёд5у.

[dule14786]

pull IMMO DATA from ECU put new dash in 5ёяvїcё mode(vvdi2 xtool.org carprog smok....) and write (import) immo data from ECU to dash

[spacewalker]

pull IMMO DATA from ECU put new dash in 5ёяvїcё mode(vvdi2 xtool.org carprog smok....) and write (import) immo data from ECU to dash

and what next ?
 you know that USD cluster use 12 buyte CS  for KEY 
when ECU use only 7 
extrac 7 byte from ECU will not allow you to lear existing keys 
............stupid amator advice

[Platone]

Good evening,


I need to replace a VW Golf 6 VDO instrument cluster. The original instrument cluster is not legible. I got a used instrument cluster. Can you help me with the VVDI2 procedure? Thank you

Do you need help?

[al70]

is it possible to read the old cluster on the bench, have you tried ?