[Desmo.Gabe]

Hi, finally I've done the engine and full electric system replacement on my motorbike! It's been an amazing work but all is fine. Only a little ( but not little :-I) problem.. The ASC lamp is always on and the system not work. ISTA diagnoses is "bmsk module not configured correctly". NOW.. I've activated the ASC with NCS (the ASC is an optional). my older bike have a BMSK.C01 module and the ASC is cleanly write, "ASC: aktive - nicht aktiv" and "GS-MODE aktive - nicht aktive". The new is BMSK.C03 and the only ASC refer is " mode 1-2-3-4" but not to chose the activation, there are some voices that I don't know: FZGM_AKTIVE (Y-N), FZGM_VERSENDEN (Y-N), FZGM_ABS_EMPF (Y-N), FZGM_CODIEROPT (Y-N), FZGM_VERBAUCHECK (Y-N), SAF_EMPF (Y-N). All these choices are "nicht aktive". Someone knows what's these value? Thanks a lot, I'm gonna crazy!!
Bye Luca.