[Bimmer540]

4.8.13 working for anyone?

Yes.

[blax123]

- Im using STD:OBD, so i renamed existing obd32.dll to obd32.ebas.dll in Folder "Rheingold\Ediabas\Bin"
- Copied obd32.dll to "Rheingold\Ediabas\Bin"
- Copied NodeISTAVoltageControl.dll to "Rheingold\Ediabas\Bin"
- Replaced IstaOperation.exe within ISTA+'s "TesterGUI\Bin\Release" folder by included one (from folder v4.08.13)
- Runned AllowFakeISTAOperation.reg file (for x64 cause of x64 Operating System)

Ista is working fine, but Voltage display is still showing "-" for KL15/KL30. What im doing wrong?

Attached some Screenshots

[Node]

Have you started NodeEdiabasVoltageControl.exe?

[blax123]

Have you started NodeEdiabasVoltageControl.exe?

Tried with the exe, without the exe

First starting the exe, then ISTA
ISTA and then the exe

Nothing works. V2 with an old ISTA works just fine for example

[blax123]

Have you started NodeEdiabasVoltageControl.exe?

No more Idea?

[Node]

Have you started NodeEdiabasVoltageControl.exe?

No more Idea?

Have you used all files from V3 package? They are different even sizes are the same as V2 and will not work when mixed.

[blax123]

Have you started NodeEdiabasVoltageControl.exe?

No more Idea?

Have you used all files from V3 package? They are different even sizes are the same as V2 and will not work when mixed.

For Sure. My old ISTA_D (4.03.31) Installation is on an external drive with your V2 running

ISTA-D 4.08.13 is on my Daily SSD with V3 Data, ISTA-D working fine but no Voltage display

[blax123]

Looooooooooool

it suddenly started working without doing anything
problem "solved", thanks Node!

[willisodhiambo]

Just as an aside. I have tried this with Ediabas that comes with BMW tools. It seems not to work with that. Works ok with the Ediabas within ISTA. I wonder why.

[Node]

Last time I tried it did work with INPA. But the only thing that changes there are those two battery/ignition circles. Not much point in those.

---

Support for v4.08.21 added.