[dsz09]

Hi,
I`m very new on this forum and I think it is a great comunity around here.
Recently bought a VW Transporter T5, the car was involved in a small crash. I have replaced steering wheel airbag, seatbelts,clock ring and now I have to reset the airbag unit.
I need step by step help,guide, what tools should I use to read the eprom or is there any device that reads via OBDII?
What do I have to do with the airbag unit before erasing the crash data?

Error codes i get with VCDS :

Sunday,09,March,2014,14:43:00:32264
VCDS Version: Release 11.11.3
Data version: 20120401
--------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Control Module Part Number: 1C0 909 605 A
Component and/or Version: 3B AIRBAG VW51 0010
Software Coding: 13122
Work Shop Code: WSC 02736
VCID: 2241F451AED4D09

6 Faults Found:

00588 - Airbag Igniter; Driver Side (N95)
32-10 - Resistance too High - Intermittent
00595 - Crash Data Stored
35-00 - -
01214 - Crash Data for Belt Tensioner Stored
35-00 - -
00654 - Seat Belt Tensioner Igniter; Driver Side (N153)
32-10 - Resistance too High - Intermittent
00655 - Seat Belt Tensioner Igniter; Passenger Side (N154)
32-10 - Resistance too High - Intermittent
00655 - Seat Belt Tensioner Igniter; Passenger Side (N154)
33-00 - Resistance too Low

Thanx

[klinika]

Send me PM and I help you.