Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
07-04-2018, 14:53 PM,
(This post was last modified: 07-04-2018, 14:55 PM by Node.)
Post: #151
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(07-04-2018, 04:16 AM)motorberserker Wrote:(06-04-2018, 08:18 AM)Node Wrote:(06-04-2018, 02:06 AM)motorberserker Wrote:(31-03-2018, 16:51 PM)Node Wrote: This solution is not designed to replace dlls starting with X in ediabas. Don't know about plan, but you will not be able to upgrade using ISTA+ without ICOM anyway. So what's the point of a plan then? |
|||
07-04-2018, 15:06 PM,
Post: #152
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
did a test yesterday @ work all seems ok only had I car , but voltage seems ok , think the rename for inpa .32dll may have to be set back to normal (original for errors to go away) or ti may just be the "I" car itself overall NICE JOB
|
|||
09-04-2018, 00:49 AM,
Post: #153
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(07-04-2018, 14:53 PM)Node Wrote: Don't know about plan, but you will not be able to upgrade using ISTA+ without ICOM anyway. So what's the point of a plan then? Perhaps it's my misunderstanding... I've heard that using ISTA/P with launcher and ICOM emulator is possable to do a ECUs upgrade with ENET, so I suppose this scene works on ISTA+. After all the ICOM is necessary for ISTA+, sorry for my misunderstanding. |
|||
09-04-2018, 07:06 AM,
Post: #154
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
It was a long time ago I used ICOM emulator so don't know if it works with ISTA. However when you use emulator then the emulator itself should handle informing voltage to ISTA.
|
|||
14-04-2018, 16:30 PM,
Post: #155
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.10.41 added.
|
|||
Reputation: +2 - Bimmer540 [+1] , DJenka [+1] | |||
19-04-2018, 16:35 PM,
Post: #156
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Hi,
I have tried it today with my ista+ 4.10.20 but not success, after that, i have remove all files, restore stock but i have met this problem. Diaglog show that control unit not connected to power source (it mean that low battery), but K15, K30 is 14v, reset pc, try many times but nothing more. Any solutions here ? Thanks |
|||
19-04-2018, 18:29 PM,
Post: #157
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(19-04-2018, 16:35 PM)aloxo Wrote: Hi, in other words it tells you the laptop is on battery and you should plug it to charger.. |
|||
19-04-2018, 22:45 PM,
Post: #158
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
I tested w ista+ work ok , when I copied file to inpa folder got error , when I doubled checked as I renamed original first , it somehow changed file type that was my error as I read instrusction , there are 3 types within inpa that need to be changed and only the 1 in ista as well ass adding the 1 within ista
hope this helps |
|||
16-05-2018, 18:42 PM,
Post: #159
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Added support for v4.11.22
|
|||
Reputation: +2 - Bimmer540 [+1] , simonchs [+1] | |||
22-05-2018, 10:55 AM,
Post: #160
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
can someone be helpful via teamviewer to sort out voltage control
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
15 Guest(s)
15 Guest(s)
Return to TopReturn to Content