[rayman18]

Do this work with ista-p and k+dcan cable?

[Bimmer540]

Do this work with ista-p and k+dcan cable?

It's very risky with K+Dcan cable!

[e46ad]

HI i am using ISTA + Standalone,

My Edabias says,

Inside C:\Rheingold\Ediabas\BIN/EDIBAS

Interface        = REMOTE

OBD32.dll renamed to OBD32.edas.dll copy new OBD32.dll to C:\Rheingold\Ediabas\BIN/EDIBAS

Copy NordISTA to C:\Rheingold\Ediabas\BIN/EDIBAS

Replaced ISTAoporations in folder,

Ran the 64bit reg file,

LOaded Volts car won#t show

[e46ad]

Working perfrct on 4.13.14 Thank you! + Thanks

[GoNz0-]

Well I have been using this and didn't click on for 3 days that this caused problems until both my cars were checked and both threw the same fault codes. It caused my E60 to throw a S0706 code for a module that doesn't exist and I coudln't get to the bottom of it until my R55 mini had the same code but had the module installed to check.

If I ran the program with the ignition off I get a S0706 code "central gateway supply (terminal 15 missing)
I then figured out if I put the ignition on I get no error.

This is only with the modified DLL with the app off so it detects clamp states (fantastic mod by the way)

[Topbannana]

Who can remote install it for me with team viewer

[bimmer71]

will your release for 4.14.20 work with

https://cartechnology.co.uk/showthread.p...#pid391415


just wondering ? left bb88 info as well as cant test till you release thanks again for all you great work you & bb88 !

[Node]

Just got back from business trip. Will probably release in the evening.

[Node]

Support for v4.14.20 added.

[Node]

Support for v4.14.30 added.