Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digiprog 3 update
28-02-2014, 20:37 PM,
Post: #1
|
|||
|
|||
Digiprog 3 update
Can someone pls help me wth an information about Digiprog3?I have tried to make an update soft,I've also connected my Digiprog3 to computer and I observed that the USB port is not working.I've opened my Digiprog3 and I studied the MotherBoard of Digiprog3 and I saw a missing cip.
So,there's someone who can plss help me and tell me the cip code indicated with red in the attached photo.Thank you |
|||
28-02-2014, 21:50 PM,
Post: #2
|
|||
|
|||
RE: Digiprog 3 update help
Can bee,the FTDI is mising !
Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU |
|||
01-03-2014, 05:27 AM,
Post: #3
|
|||
|
|||
RE: Digiprog 3 update help
FTDI cip is missing and usb not work !
|
|||
01-03-2014, 14:14 PM,
Post: #4
|
|||
|
|||
RE: Digiprog 3 update help
Is FTDI232BL 32pins
|
|||
01-03-2014, 14:24 PM,
Post: #5
|
|||
|
|||
RE: Digiprog 3 update help
(28-02-2014, 20:37 PM)14bogdan Wrote: Can someone pls help me wth an information about Digiprog3?I have tried to make an update soft,I've also connected my Digiprog3 to computer and I observed that the USB port is not working.I've opened my Digiprog3 and I studied the MotherBoard of Digiprog3 and I saw a missing cip. i had the same problem my chip was missing .... i put the FT232BL ( FTDI) but not working ..... i dont know what is the problem .... but will see.. |