Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mini f60 6wb “most” problem
|
28-10-2023, 16:00 PM,
Post: #1
|
|||
|
|||
Mini f60 6wb “most” problem
Hello everybody. mini f60 se 2018, wanted to install a 6wb instrument panel.
in esys the panel is not displayed I have an entrynav2, with a touchscreen, carplay, navigation. most optics are present in the main device, but were not active and there was no cable to the instrument cluster itself I pulled the cable and activated the most optics by coding hu_entrynav (KOMBI_CIC: set to kombi high EXTERNER_MOST: set to aktiv) the optics lit up but there is no result, I changed the most cable to another, the instrument panel is not displayed in esys the panel itself works, displays information about the car, but it is impossible to code it without the most optics anyone have any ideas? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
28-10-2023, 17:53 PM,
Post: #2
|
|||
|
|||
|
RE: Mini f60 6wb “most” problem
You have to write a new cluster to VCM, that's all.
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
|
|
|
28-10-2023, 18:43 PM,
Post: #3
|
|||
|
|||
|
RE: Mini f60 6wb “most” problem
write 6wb in the FA and vcm tree?
|
|||
|
|
|
29-10-2023, 15:00 PM,
Post: #4
|
|||
|
|||
|
RE: Mini f60 6wb “most” problem
yes, it helped, thanks!!!
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
