[haknabus]

This Thread is for my Standalone Releases, always latest.

ISTA Standalone

* HW-check disable only if needed (replace ISTAGUI.exe with ISTAGUI.exe_HW_patch)
* read FASTA Data from Vehicle is disabled in Config
* no VIN7 patch
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC.
* to programming with ENET replace RheingoldProgramming.dll with RheingoldProgramming.dll.patched_for_ENET_programming (At your own risk.)

- for Diagnose only, neccessary SQLiteDBs OTHER, en-GB, de-DE and BLP in the same Version as App (example 4.17.4x).
- for Programming is SDP needed, using older Versions allowed. Not ask me for upload.


Standalone: ISTA 4.19.40.18949 / SQLiteDBs (en-GB,de-DE) 4.19.40 / BLP 4.19.40
Standalone Installer (all above files/folders must be present in the same directory):  v4.19.40
PSdZData Lite: v4.19.40



Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

Thank you for this - I have ISTA standalone installed OK, which I'm hoping to use to code a trailer coupling retrofit.

Do I need to install PSdZData files, and if so, which directory should I copy them to?

Thanks for the advice.