Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
05-02-2017, 20:15 PM,
Post: #6
|
|||
|
|||
RE: Ultimate ediabas voltage control
(04-02-2017, 22:21 PM)Node Wrote: From the screenshot I understand you are using STD:OBD interface? Can you please make sure you correctly renamed existing original C:\Ediabas\Bin\obd32.dll to C:\Ediabas\Bin\obd32.ebas.dll and put my NodeEdiabasVoltageControlDll.dll renamed to obd32.dll as new C:\Ediabas\Bin\obd32.dll? Can you try to see what happens when you replace dll and start INPA without starting my control application? Does the main INPA menu (with chasis selection and those circles indicating voltage and ignition) work correctly when you put my dll? Hi Node, Yes, that's correct. I'm using a STD:OBD interface. I did not correctly rename the original dll (obd32.dll.) I had renamed it to obd32.old. Once I renamed it to obd32.ebas.dll, that eliminated the API error. The battery and ignition dots on the INPA main screen were both black, but I didn't cycle the ignition to see if it truly sensed the terminal state change. Unfortunately, the control application still doesn't appear to work. It doesn't matter if I start the control application first, or after INPA is launched. Either way, it doesn't change my voltage readings. Hope that helps. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content