Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Flashing HUH ISTA 4.33.20 fails
14-01-2022, 23:28 PM,
(This post was last modified: 14-01-2022, 23:31 PM by Fatalix.)
Post: #1
|
|||
|
|||
Flashing HUH ISTA 4.33.20 fails
Hi..
Ive been having issues updating on MOST with latest versions of ISTA+ with dhcp configured router connected. Ive been using the exact same setup with no issues for years with updating through ista without issues, but ever since latest firmware 3.15.08 and ista version i am not able to succeed with flashing HUH. Ive been using Sedoys installer ever since first release. Anyone have any hints about this? Im getting grey hairs over this as i cannot figure this out. Ive set router ip to 192.168.0.1 and sub mask 255.255.0.0, PC ip as auto dhcp gets ip 192.168.0.9. Dhcp router range set to 192.168.0.2 to 192.168.0.199, and icom ip gets ip 192.168.0.30. subnet mask is 255.255.0.0 in router configuration and same is set for windows ethernet dhcp. I cannot spot where this goes wrong. It all started after one of the latest ISTA updates with firmware update, and first of all i was getting ICOM connection error and couldnt calculate measures plan as connection was wrong. Then i ended up resetting my router back to factory and entered everything manually again as it was before and now i have a g31 for software that fails HUH update..... Linked info. - Remote coding & programming - F 8HP45/50/70/75 ISN reset remote
- Remote ECU tuning MEVD17 + EDC17 + MGD1 ECUS + 8HP EGS BMW/MINI - M2/M3/M4 CS, CSL OR GTS Flash F8x G8x - 8HP Alpina EGS flash F & G remote - EVO ID4 to ID6 flash - Apple Carplay activation Skype: live:fatalix - Whatsapp: PM for details |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content