[OBDSolutions]

Hi,
I'm looking for solution to FDL code RLM module in G11 LCI. Coding is secured by 16bit crc, any changes in coding made error. 

log:

Caf's werden gesucht

Tal wird generiert
NCD werden gelesen
FDL CAFD-00004744-06.6E.00 signieren.
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
ExecutionID=2022/02/10-13:22:44.541
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[RLM - 1A] prepareECUforCoding started [PROGRESS]
[RLM - 1A] prepareECUforCoding finished [PROGRESS]
[RLM - 1A] authenticateECUforCoding started [PROGRESS]
[RLM - 1A] authenticateECUforCoding finished [PROGRESS]
[RLM - 1A - cafd_00004744-006_110_000] Transaction type: cdDeploy;  Message: TA started [TRANSACTION]
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=RLM_1A_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error: 
 code: repeat job
 description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET
 severity: ERROR
 [THROWABLE]
[RLM - 1A - cafd_00004744-006_110_000] Transaction type: cdDeploy;  Message: TA finished [TRANSACTION]
[RLM - 1A] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: 
 code: repeat job
 description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET
 severity: ERROR
 [WARN]
[RLM - 1A] - [Exception - RLM - 1a] job failed with negative response error: 
 code: repeat job
 description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET
 severity: ERROR

[RLM - 1A] prepareECUforCoding started [PROGRESS]
MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=RLM_1A_ETHERNET> [DIAGSERVICE]
[RLM - 1A] prepareECUforCoding finished [PROGRESS]
[RLM - 1A] authenticateECUforCoding started [PROGRESS]
[RLM - 1A] ECU Authentication error: seed empty or not available [PROGRESS]
[] ECU Authentication error: seed empty or not available [THROWABLE]
[RLM - 1A] There was an error during TAL execution, please check the log files. [WARN]
[RLM - 1A] There was an error during TAL execution, please check the log files. [WARN]
[RLM - 1A] - [Exception - RLM - 1a] ECU Authentication error: seed empty or not available
[RLM - 1A] finalizeECUCoding started [PROGRESS]
[RLM - 1A] finalizeECUCoding finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - RLM - 1a] ECU Authentication error: seed empty or not available
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "16s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet