[PeterY]

Hi all, I have a customer that is requesting coding for a F80 M3 race car.

The car is completely gutted, and all equipment removed, the car initially had 285 faults stored, and engine wasn't starting, but now it's down to 49 faults.

I attached the list of the current faults below, if anyone has any suggestions how to clean up some of these faults.

For example: to get rid of the bonnet open warning that shows on the KOMBI, I need to code CLM_BONNET_SWITCH from "aktiv" to "nicht_aktiv".

If anyone has suggestions to shrink the error memory below, please share, much appreciated.

The things that I have done already to the car, is I updated the I-LEVEL to the latest one I have (F20-23-07-530), I edited the FA, and removed all the unnecessary equipment that have been removed from the car. Below is the current modified FA.

I wrote the modified FA to the VCM (made backup of the original first), the coded all modules with the new FA.



This is now the list of errors remaining, 49 faults. Any help to get rid of some of these errors, would be much appreciated. Thank you.





Some photos of the car interior, as mentioned earlier, it's completely gutted, I just need to remove the KAFAS2, PMA, TRSVC, and AMPT.