Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NEED HELP FLASH XPROG
05-07-2019, 18:08 PM,
Post: #1
|
|||
|
|||
NEED HELP FLASH XPROG
Hi everyone,can someone please help me with xprog clone ,bought a 5.6 clone and it stopped working ,want to downgrade to 5.1,need to know how to flash it.
Thank u |
|||
05-07-2019, 22:00 PM,
Post: #2
|
|||
|
|||
RE: NEED HELP FLASH XPROG
(05-07-2019, 18:08 PM)Shinehead Wrote: Hi everyone,can someone please help me with xprog clone ,bought a 5.6 clone and it stopped working ,want to downgrade to 5.1,need to know how to flash it. Hello hope this will help you https://cartechnology.co.uk/showthread.p...#pid371690 If mine or others posts and info are helpful please give thanks/rep
|
|||
06-07-2019, 20:26 PM,
Post: #3
|
|||
|
|||
RE: NEED HELP FLASH XPROG
(05-07-2019, 22:00 PM)dil6222 Wrote:(05-07-2019, 18:08 PM)Shinehead Wrote: Hi everyone,can someone please help me with xprog clone ,bought a 5.6 clone and it stopped working ,want to downgrade to 5.1,need to know how to flash it. Hi,thanks for reply , the procedure a bit complicated,and I only have a universal programmer which has no adaptor for the chip , is there any other alternative.thanks |
|||
07-07-2019, 09:27 AM,
Post: #4
|
|||
|
|||
RE: NEED HELP FLASH XPROG
(06-07-2019, 20:26 PM)Shinehead Wrote:(05-07-2019, 22:00 PM)dil6222 Wrote:(05-07-2019, 18:08 PM)Shinehead Wrote: Hi everyone,can someone please help me with xprog clone ,bought a 5.6 clone and it stopped working ,want to downgrade to 5.1,need to know how to flash it. Hello yes you can connect directly to the programming vias of xprog and flash if your universal programmer supports the atmega64 you will need a oscillator crystal or something capable of outputting frequency, signal generator oscillator chip etc If not usbasp is cheap couple of pounds and so is the qfp64 breakout board. If mine or others posts and info are helpful please give thanks/rep
|
|||
07-07-2019, 18:50 PM,
Post: #5
|
|||
|
|||
RE: NEED HELP FLASH XPROG
(07-07-2019, 09:27 AM)dil6222 Wrote:Hi,ok i will check the programmer if supports atmega 64 , can u explain wht is "usbadp",sorry to ask so many question ,but have never done this but im familiar with electronic stuff so i will give it a try .thanks again(06-07-2019, 20:26 PM)Shinehead Wrote:(05-07-2019, 22:00 PM)dil6222 Wrote:(05-07-2019, 18:08 PM)Shinehead Wrote: Hi everyone,can someone please help me with xprog clone ,bought a 5.6 clone and it stopped working ,want to downgrade to 5.1,need to know how to flash it. |
|||
08-07-2019, 18:10 PM,
Post: #6
|
|||
|
|||
RE: NEED HELP FLASH XPROG
(07-07-2019, 18:50 PM)Shinehead Wrote:(07-07-2019, 09:27 AM)dil6222 Wrote:Hi,ok i will check the programmer if supports atmega 64 , can u explain wht is "usbadp",sorry to ask so many question ,but have never done this but im familiar with electronic stuff so i will give it a try .thanks again(06-07-2019, 20:26 PM)Shinehead Wrote:(05-07-2019, 22:00 PM)dil6222 Wrote:(05-07-2019, 18:08 PM)Shinehead Wrote: Hi everyone,can someone please help me with xprog clone ,bought a 5.6 clone and it stopped working ,want to downgrade to 5.1,need to know how to flash it. Hello again usbasp is a microcontroller programmer that can program atmega64 and other chips it can be found on eBay etc for around 5 gbp it is small and only has few components search usbasp on eBay and you will find If mine or others posts and info are helpful please give thanks/rep
|
|||
Reputation: +1 - raffy haddad [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content