Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DAVINCI FEEDBACK - PLEASE POST ALL INFO
21-03-2023, 19:59 PM,
Post: #81
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
BMW E60 EDC16C1 + EDC16CP35
AGR off work fine
DTC off work fine!
Quote this message in a reply
[+] 2 users say Thank You to Konbak for this post
22-03-2023, 19:42 PM,
Post: #82
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(21-03-2023, 16:26 PM)DavidForgac Wrote:  Skoda Superb 2 1.6TDi CAYC 77kW PCR2.1
03L906023JJ 9978

DaVinci 1.028
EGR OFF=OK
Servise regeneration temperature good
Check after 1000 km, in my seat leon dpf burnout does not work well, before turning off the egr it was ok. It clogs and you have to burnout it in service mode.
Quote this message in a reply
[+] 1 user says Thank You to darek_naprawa for this post
02-04-2023, 09:32 AM,
Post: #83
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
Hello,
DV1.028 Peugeot 308 BHY PSA AdBlue Off Edc17c60 Work Great.......OK


Reputation: +2 - al70 [+1] , canisha [+1]
Quote this message in a reply
[+] 2 users say Thank You to amor89 for this post
03-04-2023, 09:19 AM,
Post: #84
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
DV1026, MB Sprinter EDC17CP46, CR60, Adblue OFF OK, disconnect AdBlue ECU uder the drivers seat.
Reputation: +1 - canisha [+1]
Quote this message in a reply
[+] 3 users say Thank You to sazimam for this post
08-04-2023, 11:56 AM,
Post: #85
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(22-03-2023, 19:42 PM)darek_naprawa Wrote:  
(21-03-2023, 16:26 PM)DavidForgac Wrote:  Skoda Superb 2 1.6TDi CAYC 77kW PCR2.1
03L906023JJ 9978

DaVinci 1.028
EGR OFF=OK
Servise regeneration temperature good
Check after 1000 km, in my seat leon dpf burnout does not work well, before turning off the egr it was ok. It clogs and you have to burnout it in service mode.

I don't really know if there is an automatic solution for this ecu which really works. From my experience, on this ecu, once you remove egr your dpf will be clogged in short time.
Quote this message in a reply
08-04-2023, 15:57 PM,
Post: #86
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
Jonut83

I do not know how to DaVinci because I did not try, but I removed with the ads remover and there was no problem with dpf.
Quote this message in a reply
11-04-2023, 13:31 PM,
Post: #87
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(02-04-2023, 09:32 AM)amor89 Wrote:  Hello,
DV1.028 Peugeot 308 BHY PSA AdBlue Off Edc17c60 Work Great.......OK

Do you use a bench mode file

Have done today a 2008 1.6 HDI 100 HP EDC17C60 with an OBD read.
After few starts car does not starts and no comunication with engine ecu.
Quote this message in a reply
[+] 1 user says Thank You to autoraedarum for this post
12-04-2023, 17:03 PM,
Post: #88
XZBMW  RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
Before I did the DPF, the car didn't smoke at all and the injectors were normal, now it smokes and the injectors have high values... BMW EDC16CP35... Should I write injectors code again?
Quote this message in a reply
14-04-2023, 12:35 PM,
Post: #89
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(11-04-2023, 13:31 PM)autoraedarum Wrote:  
(02-04-2023, 09:32 AM)amor89 Wrote:  Hello,
DV1.028 Peugeot 308 BHY PSA AdBlue Off Edc17c60 Work Great.......OK

Do you use a bench mode file

Have done today a 2008 1.6 HDI 100 HP EDC17C60 with an OBD read.
After few starts car does not starts and no comunication with engine ecu.


It is problem with your tool not davinci
Quote this message in a reply
[+] 1 user says Thank You to kokolo for this post
14-04-2023, 17:09 PM,
Post: #90
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(14-04-2023, 12:35 PM)kokolo Wrote:  
(11-04-2023, 13:31 PM)autoraedarum Wrote:  
(02-04-2023, 09:32 AM)amor89 Wrote:  Hello,
DV1.028 Peugeot 308 BHY PSA AdBlue Off Edc17c60 Work Great.......OK

Do you use a bench mode file

Have done today a 2008 1.6 HDI 100 HP EDC17C60 with an OBD read.
After few starts car does not starts and no comunication with engine ecu.


It is problem with your tool not davinci

Never had such problem with autotuner
Quote this message in a reply
[+] 1 user says Thank You to autoraedarum for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  KT200 v2 full with offline dongle FEEDBACK ROD-BENDERS 128 11,152 3 hours ago
Last Post: pakitko
  ktag 10.10 feedback Fabio 6 373 26-05-2024, 11:29 AM
Last Post: despabb
0Dash DaVinci 1.0.26 -1.0.28 DPF-EGR-TVA-FLAPS FREE ROD-BENDERS 127 103,736 06-05-2024, 09:46 AM
Last Post: ROD-BENDERS
  DaVinci Deluxe 1.0.34 Cracked Full pitercie 4 1,394 22-04-2024, 06:24 AM
Last Post: ROD-BENDERS
  KTM 200 Feedback - Post All Info carmageddon1970 70 17,057 06-03-2024, 20:50 PM
Last Post: pinotec
ZVW Info on 1.6tdi CAYE stage1 fisekovic 3 561 05-03-2024, 16:28 PM
Last Post: wil974
00Windows Davinci Deluxe 1.0.34 Request CenturionM 6 2,264 19-02-2024, 12:06 PM
Last Post: ROD-BENDERS
  FoxFlash FEEDBACK loki954 122 13,231 29-01-2024, 17:11 PM
Last Post: ROD-BENDERS
  Please Delete Post ecutech123 2 408 03-10-2023, 09:17 AM
Last Post: ecutech123
  Please Delete Post ecutech123 0 381 27-09-2023, 12:36 PM
Last Post: ecutech123

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content