Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FoxFlash FEEDBACK
25-10-2023, 13:06 PM,
Post: #1
|
|||
|
|||
FoxFlash FEEDBACK
Any user with this tool can share his experience.
If you are planning to buy it to have info if will do the job for you. This way you can decide before using/buying this tool. No help for people not give a feedback
|
|||
Reputation: +3 - darek_naprawa [+1] , ROD-BENDERS [+1] , sinigera [+1] | |||
25-10-2023, 14:21 PM,
Post: #2
|
|||
|
|||
RE: FoxFlash FEEDBACK
great device, I haven't had a problem with it yet, although sometimes it doesn't calculate checksums in PCR2.1 and some other drivers
the device is more suitable for Bench / BDM modes, you have to be careful with OBD, especially with older controllers - it does not always work well in some, EDC17 will not recalculate at all or incorrectly The MANAGER software together with the main software can sometimes turn itself off or catch a bug when uploading a map there are no ideals, but the device is constantly supported and patched price adequate to quality like my post and the content i share, give me a +1 recommendation and a thanks = +
|
|||
Reputation: +1 - al70 [+1] | |||
25-10-2023, 16:09 PM,
Post: #3
|
|||
|
|||
RE: FoxFlash FEEDBACK
I have just purchased this tool so will give feedback soon
Br All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - al70 [+1] | |||
25-10-2023, 19:05 PM,
Post: #4
|
|||
|
|||
RE: FoxFlash FEEDBACK
I had it for a month now, for the price is a very good tool, tested on EDC17 obd and bench, MED17 obd and bench, EDC15 obd, EDC16 bench and bdm, never had any errors or issues, let's hope it stays like this. Also is updated all the time and i know from the developer that they are working on new protocols.
Dyno Tested Stage 1 / 2 ECU Remap,
TCU Remap,
Checksum Correction,
Custom Made Programming Power Supply,
PopCorn / Hard Cut Limiter,
ECU Cloning,
PopsBangs,
Launch Control Activation,
E85 Conversion,
DPF / EGR / Adblue / NOX / Lambda Off and many more.
|
|||
Reputation: +1 - loki954 [+1] | |||
25-10-2023, 20:37 PM,
Post: #5
|
|||
|
|||
RE: FoxFlash FEEDBACK
|
|||
26-10-2023, 07:49 AM,
(This post was last modified: 26-10-2023, 07:54 AM by CenturionM.)
Post: #6
|
|||
|
|||
RE: FoxFlash FEEDBACK
I forgot to add, you have to be especially careful with the SIMOS ecu series - foxflash does not cope well with these drivers and in many cases it can kill the ECU
they could improve it and add new protocols especially SIMOS 8.4 and 8.5 recently I only had a problem with downloading the EEPROM from the ME7.5 controller with the bench option, after a few attempts I managed to do it like my post and the content i share, give me a +1 recommendation and a thanks = +
|
|||
26-10-2023, 08:35 AM,
Post: #7
|
|||
|
|||
RE: FoxFlash FEEDBACK
i tried on the bench this tool on ME7.6.1 opel meriva 1.2, reading after various attempt because at the end of reading it closes, writing same story, after various attempt at the end of writing (when normally appear popup with dash OFF and wait) the program it closes and ecu does not work.
boot mode not tried...buyed another ME7.6.1 and tried with kt200, no problem with reading and writing. anyway tried also some edc17 with fox and no problem...its only intricate, i prefer kt200. |
|||
26-10-2023, 10:08 AM,
Post: #8
|
|||
|
|||
RE: FoxFlash FEEDBACK
Hi,
Perfect tool for this price. VAG DCM6.2 read/wite via OBD OK PSA DCM6.2 read/wite via OBD OK BMW MD1CP002 read/write via BENCH MODE OK Toyota after 2005 Denso read/write via OBD MODE via pins on table OK Opel E87, E98 read/write via FULL SYSTEM OK Renault MD1CS006 read/write BENCH MODE OK EDC16 read/write full (flash, eeprom) via BENCH MODE not need opening ECU cover OK EDC17 read/write via BENCH MODE OK PCR2.1 read/wite via OBD, BENCH MODE OK PCR2.1 unlock via OBD with flash not working and after this procedure car not starting, because if try this "experiment" first read full flash via BENCH MODE If i helpful to you, please push Reputation and Thanks buttons.
|
|||
Reputation: +2 - ROD-BENDERS [+1] , loki954 [+1] | |||
26-10-2023, 11:18 AM,
Post: #9
|
|||
|
|||
RE: FoxFlash FEEDBACK
(26-10-2023, 10:08 AM)mariux0510 Wrote: Hi, Unlocking after OBD worked for me - this is the procedure of disconnecting the battery, everything is step by step, once done it works... but the eeprom after OBD cannot be unlocked, but FLASH is OK Bench mode unlocks everything PCR2.1 is sometimes difficult to extract to the Bench option because it is riveted and you need to use a sheet metal cutting device to extract the ECU like my post and the content i share, give me a +1 recommendation and a thanks = +
|
|||
Reputation: +1 - al70 [+1] | |||
26-10-2023, 13:23 PM,
Post: #10
|
|||
|
|||
RE: FoxFlash FEEDBACK
(26-10-2023, 11:18 AM)CenturionM Wrote:(26-10-2023, 10:08 AM)mariux0510 Wrote: Hi, For me not working, because after this procedure show unlocked by flash, locked by eeprom and car not starting. If i helpful to you, please push Reputation and Thanks buttons.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Invisible User(s), 1 Guest(s)
1 Invisible User(s), 1 Guest(s)
Return to TopReturn to Content