Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to volavka@hotmail.co.uk

DAVINCI FEEDBACK - PLEASE POST ALL INFO
29-04-2025, 06:58 AM,
Post: #181
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
This software is not working on MJD8F3.X1
Possible to remove DTCs bat not working correctly.


Quote this message in a reply
[+] 1 user says Thank You to tihiuvek for this post
26-05-2025, 11:12 AM,
Post: #182
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
2.0TDI 190hp EDC17C64 Adblue - Start/Stop not working after mod, same on two similar Audi A6. Has anyone else encountered this? Odis reports gearbox related cause "Gear in wrong position". No DTCs
Quote this message in a reply
04-07-2025, 15:06 PM,
Post: #183
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
FOR MJD9 BOXER ADBLUE IS NOT OK
Quote this message in a reply
[+] 1 user says Thank You to abdonete for this post
22-07-2025, 16:35 PM,
Post: #184
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(15-02-2025, 15:31 PM)kaiserstumm Wrote:  
(21-02-2024, 20:43 PM)kaiserstumm Wrote:  I have done about 50 cars with genuine davinci deluxe latest version and all beside delco_e98 worked.
I use 1.34 org:
EDC17C64_DPF_EGR-OK
SIEMENS_SID206_DPF-OK
EDC16U34_EGR-OK
DELPHI_DVM3.5_EGR_DPF-OK
EDC17CP20_DPF_EGR-OK
EDC17CP14_EGR-OK
EDC17C74_DPF_EGR-OK
EDC17C74_ADBLUE-OK
DELPHI_DCM6.2_DPF_EGR-OK
EDC17CP57_ADBLUE-OK
SIEMENS PCR2.1_DPF_EGR-OK
EDC17CP44_ADBLUE-OK
EDC17C46_EGR-OK
EDC17CP20_FLAPS-OK
EDC17C06_EGR-OK
MD1CS003_ADBLUE-OK
DCM6.2_ADBLUE-OK
EDC17C46_ADBLUE-OK
CRD3_ADBLUE-OK
EDC17CP52_DPF_EGR-OK
SIEMENS PPD1.2_FLAPS-OK
EDC17CP44_FLAPS_EGR-OK
EDC17CP34_EGR_DPF-OK
ETC...

DCM6.2 -DPF/EGR/ADBLUE -OK
MD1CS006-ADBLUE -OK
CRD3PLUS - ADBLUE OK
MD1CS03 - ADBLUE OK
EDC17C74- DPF/EGR/ADBLUE OK
SID209 - DPF -not SURE. (car goes to limp mode every few weeks)
EDC17C10 -DPF/EGR not ok (flaps also get killed with egr) Massimo sent ols file for repair



Which version did you use exactly and where can I get it?

Regards
Chris
Quote this message in a reply
[+] 1 user says Thank You to Chri1911 for this post
12-08-2025, 12:36 PM,
Post: #185
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
Original tool which works servr based. Most people seem not to understand that the сядскёd versions from newest davinci only kills dtcs and does nothing else.
https://www.aesoftech.com/

Quote this message in a reply
17-11-2025, 06:53 AM,
Post: #186
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
V1.0.26

DCM 6.2V
EGR+DPF+ADBLUE --- Not OK. Engine doesn't start.


Quote this message in a reply
17-11-2025, 07:24 AM,
Post: #187
RE: DAVINCI FEEDBACK - PLEASE POST ALL INFO
(17-11-2025, 06:53 AM)nitroscry Wrote:  V1.0.26

DCM 6.2V
EGR+DPF+ADBLUE --- Not OK. Engine doesn't start.

Are you sure that the problem is not just a checksum problem?

If I Helped,Please, Reputation+Thanks
Kess V2 5.017, PCMFlash ScanMatic, Winols, Autocom CDP+, Digiprog3, FVDI etc...
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  KT200 v2 full with offline dongle FEEDBACK ROD BENDERS 355 52,527 7 hours ago
Last Post: NeoDJW
  XirDecoder Feedback jenny123 31 1,628 03-12-2025, 22:21 PM
Last Post: sivyx
  foxflash use feedback Nermike18 0 70 17-11-2025, 02:51 AM
Last Post: Nermike18
  ktag 10.10 feedback Fabio 16 3,975 19-09-2025, 21:15 PM
Last Post: pitercie
  ECU Bench Tool FeedBack mircea13 11 7,162 17-09-2025, 06:03 AM
Last Post: Macman07
  DaVinci Deluxe - FREE ! NeoDJW 9 1,354 16-06-2025, 00:48 AM
Last Post: kami2k
0Dash Cgdi FC200 ECU Programmer Feedback Zenix 6 4,810 12-12-2024, 05:44 AM
Last Post: Edgars
  CHECKSUM CORRECTOR L-Suite 1.1 with ECU dump info srzar 4 2,021 14-11-2024, 12:55 PM
Last Post: srzar
  Solved ✔ foxFlash master tool feedback Nermike18 2 661 13-09-2024, 07:55 AM
Last Post: loki954
  7G-SCN info Program Mertim 2 526 20-08-2024, 14:23 PM
Last Post: Mertim

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content