Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to volavka@hotmail.co.uk
Vvdi prog + Bosch Ecu cable possible Clone edc17
|
24-01-2025, 19:38 PM,
Post: #1
|
|||
|
|||
|
Vvdi prog + Bosch Ecu cable possible Clone edc17
Hello guys, when vvdi prog have Bosch Ecu Adapter cable
And when read d Flash and Flash for example bmw edc17 Is this Full backup and possible to Write on other Ecu and clone ? |
|||
|
|
24-01-2025, 19:58 PM,
Post: #2
|
|||
|
|||
|
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
|
|||
|
|
|
24-01-2025, 20:00 PM,
Post: #3
|
|||
|
|||
|
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
Thanks for your answer.
Now i have Read Little Bit about this And it seems that vvdi can read it to have dump but don’t can Write M Problem is , i need isn from original Ecu to change in cas for donor Ecu But every time i Read d Flash or p Flash it goes to 94% and then shows 3 Network error and device error |
|||
|
|
|
24-01-2025, 20:19 PM,
Post: #4
|
|||
|
|||
|
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
If you change isn in cas then the gearbox will need to be virgin an learn it with the new isn
Diesel tuning/EGR/Adblue/DTC/DPF/Limiters. Virtual Files . Vehicle technical information. Just ask on PM
Virtual read files, starfinder, Bosch Ecu COMPATIBILITY search, frf and sgo files inside |
|||
| Reputation: +1 - al70 [+1] | |||
|
|
|
24-01-2025, 21:40 PM,
Post: #5
|
|||
|
|||
|
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
Thanks Loki i know . I can Reset eGs with esys
But for now i don’t have Chance to get isn from ecu Everytime at 94% device error When i try a Older Version of vvdi then it shows me error 40 failed to enter chip . In Internet they are writes that this message maybe is a Broken Bosch ecu Adapter But the Adapter is new i use it First time today |
|||
|
|
|
24-01-2025, 22:08 PM,
Post: #6
|
|||
|
|||
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
(24-01-2025, 21:40 PM)budddyyy Wrote: Thanks Loki i know . I can Reset eGs with esys Did you buy original adapter from xhorse ? Download latest software |
|||
|
|
|
24-01-2025, 22:12 PM,
Post: #7
|
|||
|
|||
|
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
I buyed Original from xhorse yes tomorrow Intro the lastest software
|
|||
|
|
|
24-01-2025, 22:30 PM,
(This post was last modified: 24-01-2025, 22:31 PM by al70.)
Post: #8
|
|||
|
|||
|
RE: Vvdi prog + Bosch Ecu cable possible Clone edc17
download here
use good 12v supply, not cheap ac adapter |