Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Lost window roll up and down after 58.3 update
26-05-2016, 21:32 PM,
Post: #11
|
|||
|
|||
Lost window roll up and down after 58.3 update
I've tried code, do you mean right click on ECU ?.
Although maybe with tokenmaster launcher. Will that make a difference ??. Thanks |
|||
27-05-2016, 09:09 AM,
Post: #12
|
|||
|
|||
RE: Lost window roll up and down after 58.3 update
(26-05-2016, 21:32 PM)berniw Wrote: I've tried code, do you mean right click on ECU ?. try with original ESYS, but without EST and without tokenmaster launcher. Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
27-05-2016, 09:10 AM,
Post: #13
|
|||
|
|||
Lost window roll up and down after 58.3 update
Ok, without EST ?. How can I code without token ?.
|
|||
27-05-2016, 15:40 PM,
Post: #14
|
|||
|
|||
Lost window roll up and down after 58.3 update
(27-05-2016, 09:10 AM)berniw Wrote: Ok, without EST ?. How can I code without token ?. Code is possible. Not is possible custom coding (code fdl) Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
27-05-2016, 16:15 PM,
Post: #15
|
|||
|
|||
RE: Lost window roll up and down after 58.3 update
I thought I would mention something that may help with this which it looks like we have already touched in this thread:
The thread has already described initialisation of power windows (the modules need to learn the top and bottom positions of windows in order to automatically roll up/down). I know you have performed initialisation via ISTA-D. Have you confirmed whether auto roll up/down works when using the normal buttons inside car? I am asking this just to try and eliminate possibilities for you. If auto roll up/down not working from buttons then we need to figure out why it is not correctly initialising windows. If it is working correctly from button, then it will be a coding/software issue. I am guessing you may be thinking it must be software/coding as this problem happened after programming/coding. However I have twice seen an interesting problem with Merc w208 - after I disabled then re-enabled auto roll up/down of windows, suddenly hall sensors would not give any reading. |
|||
27-05-2016, 17:05 PM,
Post: #16
|
|||
|
|||
Lost window roll up and down after 58.3 update
(27-05-2016, 16:15 PM)HestonDiag Wrote: I thought I would mention something that may help with this which it looks like we have already touched in this thread: Thanks very much, I seem to have solved it now, not sure if the initialisation helped but I did what Ruben_17non said to do. I used ESYS without launcher hit code on ECU and then tried the fob. It worked. So everything back to normal now, thanks to everyone for the assistance. Much appreciated. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content