[dil6222]

Hello all

I recently tried to run d1 with a9 adapter test on carprog but
It fails.
A9 test on it own works fine.
Carprog shows no response from unit and freezes it.

Any ideas what the problem is or a fїж.


Thanks

[domelec]

Far as i know this has always failed

[dil6222]

Far softwar has always failed

Hello again domelec I'm 99% sure it use to work on mine the only thing I can think of
Is updating to 4.74 firmware has killed it off or it is software related. what you think ?

[darek_naprawa]

Test d1 work at 4.74 and 8.21, does not work in 4.01 sw. Program error.

[dil6222]

Test d1 work at 4.74 and 8.21, does not work in 4.01 sw. Program error.

Ah so it is program related makes sense to be fair ive probably mixed up some flash's as well probably flashed 4.01

is the new flash firmware and lib file available for free yet? For 8.21

[domelec]

Test d1 work at 4.74 and 8.21, does not work in 4.01 sw. Program error.

Ah so it is program related makes sense to be fair ive probably mixed up some flash's as well probably flashed 4.01

is the new flash firmware and lib file available for free yet? For 8.21

no its not free

[Willail]

Hello everyone,

I have a clone carprog 7.28. It is impossible to read eeproms 24C02, 24C08 and 95160. With the 95160 eeprom, i have only FFFFFFFFF and with 24C02, carprog displays only 0000000000. Does someone has already this problems?
Can someone help me to repair my carprog?
I test the carprog with Adapter A9, all is OK. But when i test A9+D1 on carprog, i have a error like the others users of Carprog. I join some pictures

Thanks you

---

Hello everyone,

I have a clone carprog 7.28. It is impossible to read eeproms 24C02, 24C08 and 95160. With the 95160 eeprom, i have only FFFFFFFFF and with 24C02, carprog displays only 0000000000. Does someone has already this problems?
Can someone help me to repair my carprog?
I test the carprog with Adapter A9, all is OK. But when i test A9+D1 on carprog, i have a error like the others users of Carprog. I join some pictures

Thank you

[dil6222]

Hello everyone,

I have a clone carprog 7.28. It is impossible to read eeproms 24C02, 24C08 and 95160. With the 95160 eeprom, i have only FFFFFFFFF and with 24C02, carprog displays only 0000000000. Does someone has already this problems?
Can someone help me to repair my carprog?
I test the carprog with Adapter A9, all is OK. But when i test A9+D1 on carprog, i have a error like the others users of Carprog. I join some pictures

Thanks you

---

Hello everyone,

I have a clone carprog 7.28. It is impossible to read eeproms 24C02, 24C08 and 95160. With the 95160 eeprom, i have only FFFFFFFFF and with 24C02, carprog displays only 0000000000. Does someone has already this problems?
Can someone help me to repair my carprog?
I test the carprog with Adapter A9, all is OK. But when i test A9+D1 on carprog, i have a error like the others users of Carprog. I join some pictures

Thank you

Hello there as far as I know a1+d9 test doesn't work with old 4.01 firmware so that's probably what you have post here SёяїдL number from bottom right of carprog software with carprog plugged in and we,ll find out.

As for eeproms not reading there are few modifications to make to the board and even then it can not read everything.

You can swap the four 74hc125d to 74hc125m that are circled in red on carprog test window that is in your screenshot but do this after other mods I'll post some you can try shortly